User's manual cnps14x ver.150817 to ensure safe and easy installation, please read the following precautions. Www.Zalman.Com amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 cpu&apus intel socket 2011 v3 / 2011 / 1366 / 1156 / 1155 / 1150 / 775 cpus.
1 www.Zalman.Com 1. Precautions 2. Specifications 1) avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries. 2) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ing...
2 www.Zalman.Com 3. Components thermal grease (zm-stg2m) loading block double-sided tape silver bolts a(4mm) (socket 2011 v3 / 2011) spanner silver bolts b(3mm) (socket 1366/115x/775/amd) backplate manual nuts side caps clip a clip b (optional fan) cooler manual.
3 www.Zalman.Com 4. Installation requirements 1) space requirements 2) air guide removal 3) cooler orientation 126 mm 140 mm 160 mm the cooler’s installation requires an unobstructed space of 140mm(length), 126mm(width), and 160mm(height), with the cpu as a central reference point. Please check if c...
4 www.Zalman.Com 5. Installation a. Clip a installation ※ install the clip a according to a user socket as shown in the image. - slightly loosen the bolts, insert the clip a between the cover and the base, and then fasten it with the bolt. Make sure that the holes of the clip a are attached to the r...
5 www.Zalman.Com b. Nuts and side caps ※ intel socket 2011 v3 / 2011 installation does not require the nuts and side caps. [intel socket] please note the insertion directions of the nut and side cap [amd socket] please note the insertion directions of the nut and side cap caution caution intel socke...
6 www.Zalman.Com c. Double-sided tape and loading block installation ※ intel socket 2011 v3 / 2011 installation does not require the double-sided tape and loading block. ※ intel socket 1366/1156/1155/1151/1150 installation does not require the loading block. Intel socket 1366/1156/1155/1151/1150 amd...
7 www.Zalman.Com d. Backplate installation ※ intel socket 2011 v3 / 2011 installation does not require the backplate. Intel socket 1366/1156/1155/1151/1150/775 amd socket fm2/fm1/am3+/am3/am2+/am2 - align the backplate’s nuts with motherboard’s clip support holes, attach it to the back side of the m...
8 www.Zalman.Com e. Cooler installation ① apply a suitable amount of the included thermal grease on the cpu’s surface. ② place the bolt on the connection position of the clip a, adjust the bolt slightly, and then fasten it with a spanner. (use the designated bolts for each socket.) tip caution to in...
9 www.Zalman.Com ③ connect the cooler’s 4-pin connector to the motherboard’s cpu fan header. Caution after installing, be sure to activate the pwm control mode in bios on the motherboard. F. Optional fan installation (optional) ※ to install an optional fan, you should purchase it separately. Hang th...
