User's manual ver. 130620 to ensure safe and easy installation, please read the following precautions. Www.Zalman.Com cnps2x amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 cpu&apus intel socket lga 1155 / 1156 / 1150 / 775 cpus.
1 .Com 2. Specifications 1. Precautions 1) avoid inserting objects or hands into the fan while it is in operation to prevent product damage and injuries. 2) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or i...
2 .Com nuts installation bolts clip bolts thermal grease (zm-stg2m) loading block double-sided tape backplate manual cooler side caps amd clip intel clip 2) intel components 3) amd components socket 1155 /1156 / 1150 / 775 socket fm2/fm1/am3+/am3/am2+/am2 3. Components 1) common components.
3 .Com 4.Installation a. Clip installation ※ install the clip according to a user socket as shown in the image. - install the clip that fits the socket using the clip bolt make sure the clips are bent downwards when mounted on top of the cpu. Intel clip amd clip caution intel socket clip installatio...
4 .Com [intel socket] take note of the orientation of the nuts and the side caps. [amd socket] take note of the orientation of the nuts and the side caps. Caution caution intel socket 1156 / 1155 / 1150 / 775 amd socket fm2 / fm1 / am3+ / am3 / am2+ / am2 - insert the nuts to the backplate according...
5 .Com please note that the sticky side of the loading block ser ves to attach the loading block to the backplate. ② peel off one side of the double-sided tape and attach it with the sticky side facing the loading block. Then, peel off the top cover. ① peel off the loading block cover and attach it ...
6 .Com intel socket 1156 / 1155 / 1150 / 775 amd socket fm2/fm1/am3+/am3/am2+/am2 - align the backplate’s nuts with motherboard’s clip support holes, attach it to the back side of the motherboard. ① take away the fixed clip support from the motherboard. ② align the backplate with motherboard’s clip ...
7 .Com e. Cooler installation ① apply a suitable amount of thermal grease on the center of the cpu, then mount the heatsink and fasten the installation bolts based on the cpu socket type. When installing the heatsink on a tower case, make sure the heatpipe on the base is parallel to the ground, as i...
8 .Com ② connect the cooler’s 4-pin connector to the motherboard’s cpu fan header. After installing, be sure to activate the pwm control mode in bios on the motherboard. Caution m/b.
