ZALMAN CNPS5100-Al User Manual - - 3 -
2. Check whether or not nipples (spacers) for installing a CPU cooler are mounted between the mainboard and
the computer case.
◆ Installation in a Computer Case Having Nipples (spacers) for Installing a CPU Cooler (See Figure 2)
- 3 -
< Figure 1 >
* The specifications of any product may change without prior notice to improve the performance thereof.
AMD CPU
Intel P4 CPU
(1) Insert one of the provided bolts A into a tapered
spring as shown in Figure 2, and insert the bolt
A into an appropriate mounting hole (See Figure 1)
of the cooler body. Repeat until four bolts are in
stalled in the cooler body. (Caution! The diameter
of the spring increases from one end to the other
end. The end of the spring having a smaller
diameter should be directed to the head of the bolt
as shown in Figure 3.)
(2) Spread the thermal grease, which is provided together
with the cooler, on the surface of the CPU core.
Good
Bad
< Figure 2 >
Spring
Bolt A(59
-63mm)
Hole
Mainboard
Case
Mainboard
Case Nipple
Case
< Figure 3 >
1. First, check whether your CPU is a P4 CPU or an AMD CPU. Then, depending on the type of CPU,
insert the bolts (A or B) into the appropriate holes in the cooler body (See Figure 1).
IIn
ns
stta
alllla
attiio
on
n o
off FFH
HS
S