User’s manual cnps7000c series www.Zalman.Com v 2.3 to ensure safe and easy installation, please read the following precautions. Intel socket 1156/775 cpus core i7 core i5 core i3 core 2 quad core 2 duo pentium dual core pentium d pentium 4 celeron d amd socket am2/754/939/940 cpus athlon 64 athlon ...
1 .Com 1. Precautions 2. Specifications model spec. Cnps7000c-cu cnps7000c-cu led cnps7000c-alcu cnps7000c-alcu led materials pure copper pure copper and aluminum weight 750g 434g dimensions 109(l) Ⅹ 107(w) Ⅹ 63(h)㎜ fan bearing-type 2 ball-bearing rpm 1,350 ~ 2,400rpm ± 10% noise level 17.0 ~ 24.0db...
2 .Com 3. Components clip support intel clip cooler user’s manual thermal grease clip support fixing bolts washers nuts intel clip fixing bolts amd clip amd clip lever fan mate 2 cable fan mate 2 double-sided tape 1) common components 2) intel components 3) amd components socket 1156 / 775 socket am...
3 .Com 4. Installation requirements 1) space requirements 2) compatible cpus the cooler’s installation requires unobstructed space with dimensions of 112㎜(width), 110㎜(height), 62㎜(depth), and the cpu as a central reference point. Please check if components such as odds and psu protrude into the req...
4 .Com 1) intel socket 1156 / 775 installation ① install the clip support to the motherboard according to the socket-type. 5. Installation ② clear off any particles or residue from the cpu’s surface then spread a thorough layer of thermal grease on the cpu and the base of the cooler. ▶ please make n...
5 .Com 2) amd socket am2 / 754 / 939 / 940 installation ③ insert the clip fixing bolts to the clip’s installation holes and fasten with a screwdriver. ① the 7000c comes pre-installed with the intel clip. Remove the intel clip and exchange with the amd clip. Insert the amd clip upright and insert alo...
6 .Com ① connect fan mate 2 between the fan cable and the motherboard as shown in the diagram below. ② fan mate 2 can be installed to the side of the case using double-sided tape. M/b fan connector (cooler) double-sided tape 6. Fan mate 2 installation and usage 1) fan mate 2 installation ③ insert th...
7 .Com 2) fan mate 2 operation ajust the fan speed control knob for rpm control. Fan speed control knob in the case that you get a bios error beep: ① rotate the fan speed control knob clockwise to the maximum setting. ② disable cpu fan detected in bios setting or set the system monitoring program’s ...
