User’s manual www.Zalman.Com ver.130424 intel socket 1155/1156/775 cpus amd socket fm2/fm1/am3+/am3/am2+/am2 cpu & apus to ensure safe and easy installation, please read the following precautions. Cnps7xxx series.
1 .Com 2. Specifications model spec. Cnps7000c series cnps7500 led series dimensions 109(l) Ⅹ 107(w) Ⅹ 63(h)㎜ 121(l) Ⅹ 121(w) Ⅹ 67(h)㎜ fan bearing-type 2 ball-bearing rpm 1,350 ~ 2,400rpm± 10% 1,150 ~ 2,300rpm± 10% noise level 17.0 ~ 24.0dba± 10% 17.0 ~ 32.0dba± 10% input voltage 12v fan mate 2 outpu...
2 .Com 3. Components clip support cooler user’s manual clip lever (cnps7000& cnps7500) clip support fixing bolts washers nuts fan mate 2 cable fan mate 2 double-sided tape amd clip (cnps7000) thermal grease (zm-stg2m).
3 .Com 4. Installation requirements 1) space requirements 2) compatible cpus the cooler’s installation requires unobstructed space with dimensions of width, height, depth, and the cpu as a central reference point. Please check if components such as odds and psu protrude into the required space. ① in...
4 .Com 1) intel socket installation ① install the clip support to the motherboard 5. Installation ② clear off any particles or residue from the cpu’s surface then spread a thorough layer of thermal grease on the cpu and the base of the cooler. ▶ please make note of the lever slot’s direction when in...
5 .Com 2) amd socket installation ③ insert the clip lever through the clip lever slot. ④ hook the opposite side of the clip onto the lug first. Then use a screwdriver to hook the clip lever onto its lug. ① clear off any particles or residue from the cpu’s surface then spread a thorough layer of therm...
6 .Com ③ hook the opposite side of the clip onto the lug first. Then use a screwdriver to hook the clip lever onto its lug. ② insert the clip lever through the clip lever slot. ① connect fan mate 2 between the fan cable and the motherboard as shown in the diagram below. ② fan mate 2 can be installed ...
7 .Com 2) fan mate 2 operation ajust the fan speed control knob for rpm control. Fan speed control knob in case you hear a bios error beep, please take the following steps. ① rotate the fan speed control knob clockwise to its maximum setting. ② disable cpu fan detected in bios setting or set the sys...
