User’s manual cnps7500 led series www.Zalman.Com v 2.4 intel socket 1155/1156/775 cpus core i7 core i5 core i3 core 2 quad core 2 duo pentium dual core pentium d pentium 4 celeron d amd socket am3/am2+/am2/754/939/940 cpus phenom ii phenom athlon ii athlon x2 athlon fx athlon opteron dual-core opter...
1 .Com 2. Specifications model spec. Cnps7500-cu led cnps7500-alcu led materials pure copper pure copper and aluminum weight 848g 500g dimensions 121(l) Ⅹ 121(w) Ⅹ 67(h)㎜ fan bearing-type 2 ball-bearing rpm 1,150 ~ 2,300rpm ± 10% noise level 17.0 ~ 32.0dba ± 10% input voltage 12v fan mate 2 output v...
2 .Com 3. Components clip support cooler user’s manual clip lever thermal grease clip support fixing bolts washers nuts fan mate 2 cable fan mate 2 double-sided tape.
3 .Com 4. Installation requirements 1) space requirements 2) compatible cpus the cooler’s installation requires unobstructed space with dimensions of 124㎜(width), 124㎜(height), 70㎜(depth), and the cpu as a central reference point. Please check if components such as odds and psu protrude into the req...
4 .Com 1) intel socket installation ① install the clip support to the motherboard according to the socket-type. 5. Installation ② clear off any particles or residue from the cpu’s surface then spread a thorough layer of thermal grease on the cpu and the base of the cooler. ▶ please make note of the ...
5 .Com 2) amd socket installation ③ insert the clip lever through the clip’s clip lever slot. ④ hook the opposite side of the clip onto the lug first, then use a screwdriver to hook the clip lever onto its lug. ① clear off any particles or residue from the cpu’s surface then spread a thorough layer ...
6 .Com ③ hook the opposite side of the clip onto the lug first, then use a screwdriver to hook the clip lever onto its lug. ② insert the clip lever through the clip’s clip lever slot. ① connect fan mate 2 between the fan cable and the motherboard as shown in the diagram below. ② fan mate 2 can be in...
7 .Com 2) fan mate 2 operation ajust the fan speed control knob for rpm control. Fan speed control knob in the case that you get a bios error beep: ① rotate the fan speed control knob clockwise to the maximum setting. ② disable cpu fan detected in bios setting or set the system monitoring program’s ...
