User’s manual cnps7x www.Zalman.Com v 1.1 to ensure safe and easy installation, please read the following precautions intel socket 1155 / 1156 / 1366 / 775 cpu core i7 extreme core i7 core i5 core i3 core 2 extreme core 2 quad core 2 duo dual core pentium pentium d pentium 4 celeron d amd socket am3...
1 .Com 1. Precautions 2. Specifications cnps7x performa cnps7x led material pure copper and aluminum weight 360g dimensions 90(l) Ⅹ 127(w) Ⅹ 135(h)㎜ fan bearing-type long life bearing rpm 1,700 ~ 2,350rpm ± 10% 1,500 ~ 1,950rpm ± 10% noise level 22 ~ 33dba ± 15% 20 ~ 25dba ± 15% rpm [w/ register] 1,...
2 .Com 4. Installation requirements 3. Components 100㎜ 135㎜ 140㎜ user’s manual thermal grease resistor cable a-type clip support & pushpins [for lga 1155 / 1156 / 775] b-type clip support & pushpins [for lga 1366] cooler thermal grease 1) space requirements 2) air guide removal the cooler’s installa...
3 .Com 1) intel socket 1155 / 1156 / 775 / 1366 installation ①-ⓐ a-type clip support installation(socket 1155/1156/775) align the a-type clip support’s lever with the socket type and fasten to the motherboard with pushpins. 5. Installation 3) cooler orientation as shown in the diagram below, it is r...
4 .Com ② clear off any particles or residue from the cpu’ s surface. Then spread a thorough layer of thermal grease on the cpu and the base of the cooler. ①-ⓑ b-type clip support installation(socket 1366) fasten the b-type clip support to the motherboard with pushpins. M/b ③ completely unfasten the ...
5 .Com ④ install the cooler on the clip support as shown in the picture and connect the lug slot of the clip on to the lug on the clip support. Then fasten the bolts on each side a few turns at a time. ⑤ connect the cooler’s 4-pin connector to the motherboard’s cpu fan header. When reassembling the ...
6 .Com 2) amd socket am3 / am2+ / am2 installation ① clear off any particles or residue from the cpu’s surface. Then spread a thorough layer of thermal grease on the cpu and the base of the cooler. ② completely unfasten the 2 bolts already assembled on the clip and adjust the position to fit the amd...
7 .Com ④ connect the cooler’s 4-pin connector to the motherboard’s cpu fan header. Fan rpm resistor m/b m/b.
