User’s manual cnps8000a www.Zalman.Com ver. 1.1 to ensure safe and easy installation, please read the following precautions. Intel socket 1366 / 1156 / 775 cpu core i7 extreme core i7 core i5 core i3 core 2 quad core 2 duo core 2 extreme dual core pentium pentium d pentium 4 celeron d amd socket am3...
1 .Com 1. Precautions 2. Specifications 1) do not ingest the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. 2) to prevent possible injuries, gloves must be worn while handling thi...
2 .Com 4. Components 1) common components thermal grease loading block side caps nuts double-sided tape backplate user’s manual cooler amd clip intel clip 2) intel components 3) amd components socket 775 / 1156 / 1366 socket am3 / am2+ / am2 fan mate 2 cable fan mate 2 double-sided tape thermal grea...
3 .Com 5. Installation 1) intel socket 1366 / 1156 / 775 installation ② install bolts to the backplate according to the socket type and secure with side caps. Socket 775 socket 1156 socket 1366 take note of the orientation of the nuts and the side caps. Caution x o 1 2 ① insert the intel clip betwee...
4 .Com caution please make note of the orientation of the loading block’s installation. X o ③ - ⓑ socket 1366 / 1156 installation attach double-sided tape to the center of the backplate and remove the double-sided tape’s cover. ※ socket 1366 / 1156 installation does not require the loading block. At...
5 .Com ⑤ apply the enclosed thermal grease to the cpu’s surface and install the cooler by fastening the bolts. 2) amd socket am3 / am2+ / am2 installation ① insert the amd a clip between the cover and the base, and then fasten the bolts. Motherb oard x o ② install bolts to the backplate according to...
6 .Com ③ remove the sticker cover from the lower tier of the loading block and attach to the backplate. Caution take note of the orientation of the nuts and the side caps. Attach double-sided tape to the loading block and remove the double- sided tape cover. O x ④ disassemble the motherboard’s clip ...
7 .Com ⑤ apply the enclosed thermal grease to the cpu’s surface and install the cooler by fastening the bolts. ④ align the backplate nuts with the motherboard’s clip support installation holes and fasten to the motherboard. Moth erbo ard motherb oard ① connect the motherboard and fan cable to the fa...
8 .Com 2) fan mate 2 usage rotating the fan speed control knob for rpm control. Fan speed control knob in case you get a bios error beep: ① rotate the fan speed control knob to its maximum setting. ② disable cpu fan detected in bios setting or set the system monitoring program’s cpu fan rpm to the l...
