User’s manual cnps8700 led www.Zalman.Com v 2.4 intel socket 1155/1156/775 cpus core i7 core i5 core i3 core 2 quad core 2 duo pentium dual core pentium d pentium 4 celeron d amd socket am3/am2+/am2/754/939/940 cpus phenom ii phenom athlon ii athlon x2 athlon fx athlon opteron dual-core opteron semp...
1 .Com 2. Specifications model spec. Cnps8700 led material pure copper weight 475g dimensions 120(l) Ⅹ 123(w) Ⅹ 67(h)㎜ fan bearing-type 2 ball-bearing rpm 1,150 ~ 2,300rpm ± 10% noise level 17.5 ~ 33dba ± 10% input voltage 12v fan mate 2 output voltage 5 ~ 11v ± 2% maximum capacity up to 6w 1. Preca...
2 .Com 3. Components clip support cooler clip clip lever user’s manual thermal grease clip support fixing bolts washers nuts fan mate 2 cable fan mate 2 double-sided tape.
3 .Com 4. Installation requirements 1) space requirements the cooler’s installation requires unobstructed space with dimensions of 123㎜(width), 126㎜(height), 70㎜(depth), and the cpu as a central reference point. Please check if components such as odds and psu protrude into the required space. 2) com...
4 .Com ② clear off any particles or residue from the cpu’s surface then spread a thorough layer of thermal grease on the cpu and the base of the cooler. ③ insert the intel clip tilted on its side, then align the center hole and the base cover protrusion. ▶ please make note of the lever slot’s direct...
5 .Com ④ align and insert the clip lever onto the clip’s intel slot. ⑥ refer to section ‘6. Fan mate 2 installation and usage’ for instructions on power connection. ① clear off any particles or residue from the cpu’s surface then spread a thorough layer of thermal grease on the cpu and the base of t...
6 .Com ② insert the amd clip tilted on its side, then align the center hole and the base cover protrusion. ⑥ refer to section ‘6. Fan mate 2 installation and usage’ for instructions on power connection. ③ align and insert the clip lever onto the clip’s amd slot. Intel slot amd slot ⑤ hook the opposi...
7 .Com ① connect fan mate 2 between the fan cable and the motherboard as shown in the diagram below. ② fan mate 2 can be installed to the side of the case using double-sided tape. M/b fan connector (cooler) double-sided tape 6. Fan mate 2 installation and usage 1) fan mate 2 installation 2) fan mate...
8 .Com gs1000 / gs1000se • e-atx / standard atx / microatx compatible * supports intel dual xeon server motherboards • up to 6 hot swap hdd bays * gs1000(3 standard / 3 optional) * gs1000 se(optional) • tool-free hdd installation • airflow optimized design • vibration absorbing hdd dampers and feet ...
