User's manual cnps8900 series ver 1.1 www.Zalman.Com amd socket fm1/am3+/am3/am2+/am2 cpu intel socket 1366/1156/1155/775 cpu opteron dual-core opteron sempron athlon ii athlon x2 athlon fx athlon core i7 extreme core i7 core i5 core i3 core 2 extreme core 2 quad core 2 duo pentium dual-core pentium...
1 www.Zalman.Com the cooler’s installation requires an unobstructed space of 120mm(width), 120mm(length), and 60mm(height), with the cpu as a central reference point. Please check if components such as odds and psu protrude into the required space. Model spec. Cnps8900 extreme cnps8900 quiet materia...
2 www.Zalman.Com intel clip (socket 1366/1156/1155/775) amd clip (socket fm1/am3+/am3/am2+/ am2) thermal grease (zm-stg2m) loading block double-sided tape backplate user’s manual nuts side caps bolts (cooler) bolts (clip) extension fan cable cooler 4. Components 2) intel 구성품 2) intel components 3) a...
3 www.Zalman.Com 5. Installation connect the extension fan cable to the fan connector of cooler. ① install the intel clip to the base of cooler using the bolts (clip). Please make sure to put the curved part of clip toward the base as shown in the image. A . Intel socket 1366/1156/1155/775 installat...
4 www.Zalman.Com socket 775 socket 1156/1155 socket 1366 1 2 ② install the side cap to the backplate according to a socket type. Please note the orientation of the nuts and the side caps. X o caution ③ socket 1366/1156/1155 installation attach double-sided tape to the center of the backplate and rem...
5 www.Zalman.Com x o caution please note of the orientation of the loading block's installation. ④ socket 775 installation remove the sticker cover from the lower tier of the loading block and attach to the backplate. Attach double-sided tape to the loading block and remove the double-sided tape cov...
6 www.Zalman.Com in the case of tower enclosure, the direction of heatpipe to be horizontally as shown in the image. The vertical installation can affect the performance of heat dissipation. ⑥ spread the thermal grease on the cpu’s surface and put the cooler on the center of cpu and then fasten the ...
7 www.Zalman.Com b . Amd socket fm1/am3+/am3/am2+/am2 installation ① install the amd clip to the base of cooler using the bolts (clip). Please make sure to put the curved part of clip toward the base as shown in the image. 1 2 ② install the side cap to the backplate. X o please note of the orientati...
8 www.Zalman.Com ③ remove the sticker cover from the lower tier of the loading block and attach to the backplate. Caution attach double-sided tape to the loading block and remove the double-sided tape cover loading block double-sided tape o x ④ take away the fixed clip support from the motherboard. ...
9 www.Zalman.Com ⑤ align the backplate’s holes with motherboard’s clip support holes, attach it to the back side of the motherboard. ⑥ spread the thermal grease on the cpu’s surface and put the cooler on the center of cpu and then fasten the bolts (cooler) to install the cooler. M/b m/b please make ...
