ZALMAN CNPS9700 LED User Manual - page 5
※
The specifications of any product may change without prior notice to improve performance.
4
⑤
⑤
Power Connection
◆
Please refer to “10. Power Connection” on page 6.
1) Intel Socket 775
①
①
Clip Installation
Refer to “The Clip Installation Method” on page 3 to correctly install the Clip (S-Type,
⑥) according to
the orientation of the Retention Guide.
②
②
Clip Support Installation
Align the Clip Support for Socket 775 (
⑨) and the Backplate for Socket 775 (⑩) with the mounting holes
on the motherboard, and fasten them together by using the Clip Support Fixing Bolts (
⑧).
The Lever Slot on the Clip Support for Socket 775 (
⑨) must be properly oriented on the hinged side
of the socket lever when installing.
※
The Backplate Support on the Backplate for Socket 775 (
⑩) can be removed if deemed unnecessary.
③
③
Thermal Grease Application
Clear off particles or any residue from the contact surface of the CPU and heatsink. Shake the
Thermal Grease (ZM-STG1,
②) well then apply on the contact surface of the CPU and heatsink base.
CPU
CPU
CPU
CPU
※
Note
When installing the CNPS9700 on a motherboard with a horizontally-
oriented Retention Guide, take extra care to not exert excessive force
on the fan. Excessive force may damage the fan.
Clip Support Fixing Bolt,
⑧
Clip Support for Socket 775,
⑨
Motherboard
Backplate for Socket 775,
⑩
Backplate Support
Socket Lever Hinge
Socket Lever
Lever Slot
④
④
Cooler Installation
Insert two Bolts (
⑦) into the holes of the Clip (S-type, ⑥) and
place the CNPS9700 on the center of the CPU. Slightly fasten
the Bolts (
⑦) into the holes of the Clip Support for Socket 775
(
⑨), then fasten the Bolts (⑦) in an alternating manner until the
Clip (S-Type,
⑥) is completely pressed against the Clip Support
for Socket 775.
Bolt,
⑦
Clip(S-Type),
⑥