ZALMAN HD135 User Manual - page 12
E
NGLISH
5) Deciding on Air Duct Location
Install the Air Duct connected to the Top Plate right above the CPU cooler for
optimal CPU cooling.
The specifications of any product may change without prior notice to improve performance.
HD135
11
Top Plate
Air Duct
Power
PCB
Power LED
Connector
Motherboard
Front Panel Port
VFD
CPU cooler performance will drastically decrease if the installation is made
without the Air Duct. Also minimize the distance between the Air Duct and the
CPU cooler by adjusting the length of the Air Duct.
Note)
The Case Power SW Connector of the Power PCB is already connected to
the VFD as shown in the picture.
Note)
6) Connecting the Cables
(1) Power and Data Transmission Cables
Connect the Power and Data Transmission cables (IDE or SATA) required for
the HDD, ODD, FDD, VGA etc.
(2) Power LED Cable
Connect the Power LED Connector (2-Pin or 3-Pin) connected to the Power
PCB to the motherboard's Front Panel Port (refer to the motherboard manual).