ZALMAN Trimon ZM-M240W User Manual - 3. Cable Connections
3. Cable Connections
No.
Input / Output
Cable Type
1
DC 12V 5A IN
ADAPTER CABLE JACK
2 Audio
IN
Audio Cable *2
3
RGB IN
15-pin D-Sub Signal Cable
4 DVI DVI-D Cable *1(Optional)
*1
: For DVI Model only. *2 : For Audio Model only.
3-1. Plug & Play
The adoption of the new VESA Plug and Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display. This monitor automatically tells the PC system its Extended
Display Identification Data (EDID) using Display Data Channel(DDC) protocols so the PC
system can automatically configure itself to use the flat panel display.
3-2. Warm-Up Time
All LCD monitors need time to become thermally stable whenever you turn on the monitor
after letting the monitor be turned off for a couple of hours. Therefore, to achieve more
accurate adjustments of parameters, allow the LCD monitor to be warmed up for at least 30
minutes before making any screen adjustments.
!
When the condition of the screen is not good, please press the "AUTO" button.
(This function may cause some temporary noise on the screen depending on VGA cards)
6