User’s manual vf3000f http://www.Zalman.Com ver. 1.1 to ensure safe and easy installation, please read the following precautions. Nvidia geforce gtx 465 nvidia geforce gtx 470 nvidia geforce gtx 480
1 .Com 1. Precautions 2. Specifications model spec. Vf3000f material heatsink fins pure aluminum base pure copper heatpipe pure copper weight 430g dimensions 239(l) × 98(w) × 51(h)㎜ fan bearing type ebr bearing dimension 92(l) Ⅹ 92(w) Ⅹ 15(h)㎜ rpm [fan mate 2] 1400 ~ 3000 rpm ± 15% noise level [fan m...
2 .Com 3. Components user’s manual vf3000f vga ram heatsink gtx480 gtx470 / 465 or thermal grease [zm-stg2] rubber washer × 12 pet washer × 10 pvc washer × 6 nipple × 4 bolt × 10 rubber ring × 4 spring × 4 fixing nut × 4 fan mate 2 cable fan mate 2 double-sided tape.
3 .Com 4. Exploded view vga cooler nipple rubber ring vga ram heatsink rubber washer vga chipset pvc washer spring fixing nut pet washer bolt tip the manual makes references to the installation procedure of gtx470/ 465 vga ram heatsink..
4 .Com 1) vga ram heatsink rubber washer attachment 2) vga card pet washer attachment attach the rubber washers to the vga ram heatsink’s holes. Attach the pet washers to the vga card’s holes on the rear. 5. Installation 3) vga ram, fet chipset thermal grease application clean the contact surface of...
5 .Com caution ▶ make sure the cooler base is installed in full adhesion with the vga chipset. ▶ make sure there is no physical interference between the vga card components and the vga ram heatsink. 4) vga ram heatsink attachment 5) vga ram heatsink fastening attach the vga ram heatsink to the vga c...
6 .Com 7) vga chipset thermal grease application 8) cooler installation apply a thin and thorough layer of thermal grease on the contact surface of the vga chipset that touches the base of the vga cooler after installing the nipples and rubber rings to the cooler, mount the cooler to the vga card. 9...
7 .Com 1) fan mate 2 installation ▶ please tighten each of the 4 fixing nuts one rotation at a time until all are completely tightened. ※ completely fastening one nut at a time can damage the vga chipset. ▶ make sure the cooler base is installed in full adhesion with the vga chipset. ▶ make sure the...
8 .Com 2) fan mate 2 operation adjust the desired rpm setting by moving the fan speed control knob left or right. Fan speed control knob.
