ZALMAN VF770 User Manual - .Com
of
9
6
.COM
5) Spring Insertion on the Fixing Nut
6) VGA Cooler Installation
Install the Spring end with the smaller diameter on the Fixing Nut as shown
in the diagram.
①
After installing the Rubber Washers to the cooler, face the VGA card’s
side with the fan downward, and align with the installation holes.
②
Use the Spring-installed Fixing Bolts to install the VGA cooler.
▶
Make sure the cooler’s base is completely in contact with the VGA chipset.
▶
Make sure the VGA cooler does not interfere with the VGA card’s
components.
Caution
Please tighten each Fixing Nut one rotation at a time until all are completely
tightened.