ZALMAN ZM-2HC2 User Manual - ( O )
* The specifications of any product may change without prior notice to improve the performance thereof.
6. Components
●
Assembed NP Heatpipe HDD Cooler
- Two (2) Al Bars
- Eleven (11) Heatpipes
●
Four (4) A-Type Bolts : For fastening the HDD
●
Four (4) B-Type Bolts : For installing the HDD Cooler
●
Four (4) Dampers : For reducing the HDD noise and vibration
●
One (1) Ground Wire : For Grounding the HDD
●
Spare Parts : A-Type Bolt, B-Type Bolt, Damper (One of Each)
●
Mounting Hole Sticker : For indicating the drilling positions on the case
●
User’s Manual
See the
7. Before Installing
1) Use a small amount of force : if excessive force is used when installing, the product
may warp or be deformed.
2) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the
product outside its intended purpose.
3) HDD coupled with NP Heatpipe HDD Cooler should always be installed in the case
with the heatpipes facing up. [Refer to pictures below]
3
( O )
( X )
Verkrijgbaar bij: Grafi-Call Computers BV. Leiden