ZALMAN ZM - HS100 User Manual - .Com
of
5
3
.COM
1) Installation to the Case
2) Power, S-ATA and 3-Pin Fan Installation
5. Installation
Connect the 4-Pin Power Cable and the S-ATA Cable. Connecting the Fan
to the Fan Connector enables the Fan Control function.
Use the enclosed Bolts to mount the ZM-HS100 to the case.
▶
Hot Swap functions normally even if the Fan Connector is not connected.
▶
Hot Swap feature may or may not be supported depending on the type of
motherboard. Please refer to the motherboard’s manual.
▶
For stable power supply, connect both Power Cables.
Tip