ZALMAN ZM-M220W User Manual

Page of 16

Download

Print this page

Bookmark us

ZM-M220W User’s Guide

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class

B digital device pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

with can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures :

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

-Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not

expressly approved by the grantee or manufacturer could void the users

authority to operate such equipment.

1 2 3 4 5 6 7 Next › »

Summary of ZM-M220W

Page 1
1 zm-m220w user’s guide fcc statement this equipment has been tested and found to comply with the limits for a class b digital device pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equi...
Page 2: • Contents
2 • contents 1. Warning & cautions 2. Components 3. Connecting monitor cables 4. Function keys 5. Display specifications 6. Monitor specifications 7. Monitor elevation/rotation/swivel functions 8. Troubleshooting (when using 2d & 3d modes).
Page 3: 1. Warning & Cautions
3 1. Warning & cautions 1-1. Warning - inserting objects into the monitor’s vents or a/v outlet can result in fire or electrocution. - do not disassemble, repair, or alter the product without the consent of the manufacturer. It could result in electrocution. - do not pull on the cables to unplug the...
Page 4
4 - zalman tech co., ltd. Is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing. - using the monitor in 3d mode for 1 whole hour or more ...
Page 5: 2. Components
5 2. Components *1 : for dvi model only. *2 : for audio model only. Notice please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Please use the cables that are provided. Zalman does not take responsibility for any problems that arise from...
Page 6: 3. Connecting Monitor Cables
6 3. Connecting monitor cables *1 : for dvi model only *2 : for audio model only no. Input / output cable type 1 power power cord 2 pc 15-pin d-sub signal cable 3 dvi(optional) dvi-d cable *1(optional) 4 spk in audio cable *2 5 spk out external speaker cable (not included) *2.
Page 7: 4. Function Keys
7 4. Function keys menu opens / closes the osd main menu sel / auto sel : selects a command function. Auto : optimizes image quality automatically. *1 mute / ▲ 1. Selects the previous control setting. 2. Increases the current option value. Mute : sound mute on/off button. *2 vol / ▼ 1. Selects the n...
Page 8
8 4-1 picture settings ● brightness : changes the overall light intensity of the images being displayed. ● contrast : changes the ratio of light intensity between the brightest white and darkest black. ● h postion : adjusts the horizontal position of the display. *1 ● v position : adjusts the vertic...
Page 9
9 4-4 misc settings ● language : selects the language for the osd menu. ● recall : loads factory default settings. ● input select : selects the display’s input. *1 ● audio : sets audio function on / off. *2 ●screen size : sets the screen ratio to ‘16:10’ or ‘4:3’. *1 : for dvi model only. *2: for au...
Page 10: 5. Display Specifications
10 5. Display specifications 5-1 display modes and frequencies mode resolution horizontal frequency(khz) vertical frequency(hz) pixel clock(mhz) sync polarity (h/v) 720 x 400 31.468 70.087 28.322 -/+ 31.468 59.940 25.175 -/- 35.000 66.670 30.240 -/- vga 640 x 480 37.500 75.000 31.500 -/- 37.879 60.3...
Page 11: 6. Monitor Specifications
11 6. Monitor specifications mode analog digital lcd 22inch wide (55.9cm) frequency horizontal : 31.5 ~ 80khz vertical : 56 ~ 75hz horizontal : 31 ~ 64khz vertical : 59 ~ 61hz resolution 1680x1050@60hz (wsxga+) response time 5ms(typ) brightness 300cd/㎡ 3d view angle 90°(l/r) / 10~12°(u/d) contrast r...
Page 12
12 7. Monitor elevation/rotation/swivel functions tip : please remove the screw on the back of the stand to use the functions above. ** the display can be rotated 90 degrees and operated with downloaded or graphic card manufacturer supplied display rotation software. A display rotation software is n...
Page 13
13.
Page 14: 8. Troubleshooting
14 8. Troubleshooting opening the product may cause electrocution of the user or critical damage to the product. Product malfunction arising from external causes, including but not limited to improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, ...
Page 15
15 8-2. In 3d mode 1. Blurs and patterns are present when the screen is off. - this phenomenon is the result of the interference of outer light present on the air layer between the lcd screen and the 3d filter. The intensity of this pattern is very weak, which makes it unnoticeable when the lcd scre...
Page 16
16 3. If the image is seen in 2d and not 3d - this monitor is a 2d/3d convertible monitor. Media that was produced in 2d can only be viewed in 2d, and only media created in 3d can be viewed in 3d. 4. Reflections are seen on the screen - this monitor has a glass 3d filter attached to the front side o...