ZALMAN ZM-MFC2 User Manual

Manual is about: Multi Fan Controller

Summary of ZM-MFC2

  • Page 1

    2.

  • Page 2

    ※ the specifications of product may change without any prior notice to improve performance. 1 safety precautions warning neglecting the following may cause serious injury or death. ▶ opening the cover of the product while the power cord is plugged into the current/voltage sensor (cvs) may cause elec...

  • Page 3

    ※ the specifications of product may change without any prior notice to improve performance. 2 1. Real time display of power consumption. 2. Four sensors for temperature monitoring and display. 3. Monitoring and control of one pwm fan and three standard fans. 4. Alarm system to notify non-operation o...

  • Page 4

    ※ the specifications of product may change without any prior notice to improve performance. 3 graphic power load meter: displays power between 30 to 800w in 4 stages. Numeric power load display: numerically displays power between 30 and 800w. (the numeric power load display will read “lll”when an ov...

  • Page 5

    ※ the specifications of product may change without any prior notice to improve performance. 4 1. Turn the computer’s power off and unplug the main power cord before installing zm-mfc2. 2. Install the zm-mfc2 into a 5.25 " odd bay as shown in the diagram. 3. Fix it in place with the use of bolts. 4. ...

  • Page 6

    ※ the specifications of product may change without any prior notice to improve performance. 5 connections the main ac power cord is not provided with zm-mfc2..

  • Page 7

    ※ the specifications of product may change without any prior notice to improve performance. 6 c3 cable caution : an error can occur if the fan rpm is set too low. In this case, deactivate the monitoring feature for the cpu fan in the bios. For bios settings information, contact the motherboard manuf...

  • Page 8

    ※ the specifications of product may change without any prior notice to improve performance. 7 operational guidelines four channels of zm-mfc2 detect fan rpm signals. The alarm will activate if a fan is not connected or if there is no rpm input signal for any of the channels. To deactivate the alarm,...

  • Page 9

    ※ the specifications of product may change without any prior notice to improve performance. 8 zalman’s cnps (computer noise prevention system) products for a stable and noiseless system of the highest quality, use zalman’s ultra quiet cpu coolers, ultra quiet vga coolers, ultra quiet power supplies,...