ZALMAN ZM-NC1000 User Manual - page 4
※
The specifications of any product may change without prior notice to improve performance.
3
5. Operation Guide
1) The ZM-NC1000 is powered by USB connection to a notebook computer using the included
USB Cable.
2) The unused USB port of a ZM-NC1000 that is connected to a notebook computer can be used
for indirectly connecting a USB device to the notebook computer.
3) The lifespan of heat-sensitive LCD panels in notebook computers can be increased by using
the ZM-NC1000 to cool the keypad area before shutting the notebook.
4) The fan rpm of a ZM-NC1000 can be adjusted to the user’s preference.
(Even an rpm setting below the mid-range provides sufficient cooling for the notebook.)
1. The power consumption of a USB device that will be connected to the remaining USB
port on a ZM-NC1000 must NOT exceed 1.9 watt.
2. The “ ” mark on the Fan RPM Control Wheel indicates the mid-range rpm.
3. When operated at low fan rpm settings, the ON/OFF status of a ZM-NC1000 may not
be audibly distinguishable, requiring a visual confirmation through the Power LED’s
ON/OFF status.
4. When storing the ZM-NC1000, preventing the accumulation of dust in the vents and
inlets will maintain optimal sanitary and performance conditions.
5. Notebook computers with relatively thick rubber feet increase the distance between the notebook
computer and the ZM-NC1000, facilitating enhanced airflow and cooling performance.
Note )
USB Cable
ZM-NC1000
USB Device