ZALMAN ZM-NSP100 User Manual - .Com
1
.COM
1. Precautions
2. Specifications
1)
Check the components list and condition of the product before
installation. If any problem is found, contact the retailer to obtain a
replacement.
2)
Excessive force exerted on the fan may cause damage to the fan and/
or system.
3)
Please check if all cords are connected properly prior to use.
4)
Please keep units away from water and liquids to prevent damages.
5)
Please keep out of way of humidity, direct sunlight, heat appliances and
other heat emitting devices.
6)
Please check that USB device is properly recognized by your Operating
System.
7)
Please install unit in a vibration-free and stable environment.
8)
Product design and specifications may be revised to improve quality
and performance.
Model
Spec.
ZM-NSP100
Power
3W + 3W = 6W RMS Total
Speakers
30mm 4Ohm 3W x 2pcs
Frequency Response Range
60Hz~18KHz
Dimensions (W x D x H)
50 x 40 x 120mm
Weight
150g
Connectivity
Cable length
0.75m
Connectors
USB Port
USB
USB 2.0
Convenience
Plug and Play
Yes
Travel Pouch Included
Yes
System
Requirement
USB
Free USB Port
OS
Win98 SE, ME
2000, XP, Vista, Win7
Mac OS X or higher
Loud Speaker
Magnet System
Neodymium
Operation Temperature
0 to 45 degrees ℃
Operation Humidity
20% to 90% H
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to
external causes, including but not limited to, improper use, problems
with electrical power, accident, neglect, alteration, repair, improper
installation, or improper testing.