1. DL manuals
  2. ZALMAN
  3. Headphone
  4. ZM-RS6F
  5. User Manual

ZALMAN ZM-RS6F User Manual

Other manuals for ZM-RS6F: User Manual
Manual is about: USB (USB Surround Sound Headphones)

Summary of ZM-RS6F

  • Page 1

    Zm-rs6f usb (usb surround sound headphones) user’s manual thank you for purchasing zalman’s zm-rs6f usb (usb surround sound headphones). Please read the user’s manual thoroughly before using the product and keep the ‘product warranty’ document. [1] features z in-line 5.1 channel usb soundcard z usb ...

  • Page 2

    [3] system requirements ● software os: microsoft windows xp, vista ● hardware notebook: pentium iii 700mhz or greater (1ghz or greater recommended) desktop: pentium iii 800mhz or greater (1ghz or greater recommended), celeron 1.3ghz or greater memory: 256mb or greater usb port: usb 1.1 / 2.0 compati...

  • Page 3

    [5] part names headphones / volume control / usb connector operation led displays the operating status of the product. Volume control buttons adjusts the volume of the headphones. Usb connector connects the product to the pc’s usb port. [6] how to wear the headphones zm-rs6f usb is designed in an ov...

  • Page 4

    [7] installation connect the headphones’ usb connector to the pc’s usb port. The os will automatically detect the headphones, and the “found new hardware” message will pop up. * this product could generate a slight pop-up noise during connection to or removal from of the pc’s usb port. Therefore, it...

  • Page 5

    [8] software installation inserting the provided driver & utility cd into the pc’s cd-rom/dvd-rom drive will generate an auto run of the installation program. (if auto run is not executed, then run the setup.Exe file from the cd) - 5 -.

  • Page 6

    Proceed with the installation according to the directions. Once installation is complete, restart the system. - 6 -.

  • Page 7

    [9] system configuration click on the ‘usb 3d sound configuration’ icon in the task manager on the bottom right side of the os. - 7 -.

  • Page 8

    Click on the ‘main setting’ tab. Output device: select ‘6 channel’( ) dsp mode: clicking on the digital volume button( ) will allow volume control per channel. Clicking on the ‘speaker test’ button ( ) on the bottom will run the channel test. * the zm-rs6f usb is a five channel unit that does not ha...

  • Page 9

    Click on the ‘mixer’ tab. Vol: adjusts the volume level and balance regarding the audio input source. Select ‘microphone’ and ‘line in’ to disable them (this product does not have mic and line input terminals. Therefore, the features mentioned above is should be muted). There are two ways to control...

  • Page 10

    Click on the ‘effect’ tab. Environment: produces various sound field effects of concert halls, living rooms, assembly halls, etc. Environment size: select the size of the listening room (small, normal, large). It is set to normal by default. Equalizer: volume can be controlled by frequency, and a pr...

  • Page 11

    [10] trouble shooting 1) when no sound is generated - check the activation status of the usb controller in the cmos settings of the pc. - check to see if the ‘c-media usb sound device’ has been set as the basic device for sound playback in the pc’s control panel(sounds and audio devices properties)....

  • Page 12

    [11] safety precautions please read the following safety precautions thoroughly before using the product. Keep in an easily accessible place after reading for future use. The mark is intended to lead customers into using the product safely and properly to prevent any physical or monetary damages to ...

  • Page 13

    - 13 - [12] product warranty (international) warranty – if this product has any defects, then zalman guarantees that it can be exchanged within one (1) year from the time of purchase. * product exchange is made with the reseller where the product was purchased. For further inquiries, contact zalman ...