ZALMAN ZM-RSSC V2 User Manual - Up Power Dvd 4.0 Settings
Manual is about: external usb 5.1Ch Sound Card
of
16
If you want to listen to DVD 5.1 channel sound using this sound card,
additional settings are required on the DVD player software.
1) Audio Output
Right click > ‘configuration’ > ‘Audio’ tab > Audio Output’
- Select “6 Speaker”.
The Power DVD software, which
comes bundled with the DVD-
ROM Drive, may not support '6
Speaker' mode.
Up Power DVD 4.0 Settings
10
Digital Output
※
You can output 5.1 channel digital
signals to an external device, e.g., an
external decoder, speaker system with
internal decoder etc. using the digital
(“Coaxial/Optical”) output located next
to the USB Port. In this case, analog
output is automatically turned off.