ZALMAN ZM80D-HP Manual

Manual is about: Cooler ZM80D-HP

Summary of ZM80D-HP

  • Page 1

    Www.Zalman.Co.Kr www.Zalmanusa.Com 1 product manual is provided in the following languages : ● english ● korean to better understand the installation process, check out the flash movie at our website (www.Zalman.Co.Kr). ※ please read this manual thoroughly before installation. ※ the specifications o...

  • Page 2

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 2 1. Please read this manual thoroughly before installation. 2. This product is designed to accommodate an optional fan (zm-op1). You can expect satisfactory cooling performance with this product alone, but if you want even more cooling, you can attach the...

  • Page 3

    Www.Zalman.Co.Kr www.Zalmanusa.Com 3 heatsink mounting hole (3 mm) vga chipset (x) (o) table of contents 1. Features 3 2. Specifications 3 3. Compatible vga cards 3 4. Components 4 5. Exploded view 5 6. Installation 6 7. Zm80d- hp optional fan installation 15 8. Zalman noise prevention system 16 1. ...

  • Page 4

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 4 frontside heatsink 1ea backside heatsink 1ea heatpipe cover 1ea frontside heatsink base 1 set a type b type screw driver 1ea backside heatsink base 1 set vga ram heatsinks 1 set heatpipe a 1ea heatpipe b 1ea a type frontside 4ea b type backside 4ea 4. Co...

  • Page 5

    Www.Zalman.Co.Kr www.Zalmanusa.Com 5 5. Exploded view sticker bolt b (8 mm) logo frontside heatsink frontside ram heatsink bolt a rubber ring nipple nut a backside heatsink base plate link nipple plate link washer bolt a (10 mm) frontside heatsink base heatpipe a bolt b (8 mm) backside heatsink bolt...

  • Page 6

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 6 good (o) good (o) bad (x) good (o) vga ram vga chipset front back thermal tape film frontside ram heatsink backside ram heatsink vga ram heatsinks compare your computer case with the cases in the diagram for compatibility. The zm80d-hp cannot be used in ...

  • Page 7

    Www.Zalman.Co.Kr www.Zalmanusa.Com 7 type a type b frontside heatsink base 1) clean off the contact surface of the vga chipset thoroughly. 2) evenly apply the thermal grease onto the vga chipset, using a piece of cardboard. Most vga chipset surfaces are slightly concave and require more thermal grea...

  • Page 8

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 8 frontside heatsink base backside heatsink base sticker nipple nipple bolt a rubber rings type a type b (o) (x) front back plate spring backside heatsink base slot connecter bolt c groove for heatpipe nipple 1) slide the rubber ring onto each bolt a protr...

  • Page 9

    Www.Zalman.Co.Kr www.Zalmanusa.Com 9 tighten nut a on the nipple that now has the plate spring in place. 6.9. Installing the backside heatsink base assembly 1) viewing from the side, make sure that both heatsink base assemblies are parallel with the vga card, and that their edges are parallel to eac...

  • Page 10

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 10 thermal grease apply thermal grease here (grooves for heatpipes) frontside heatsink heatpipe a heatpipe b frontside heatsink base heatpipe b heatpipe a heatpipe a heatpipe b frontside heatsink base 50 mm 30 mm frontside heatsink base front back ** thick...

  • Page 11

    Www.Zalman.Co.Kr www.Zalmanusa.Com 11 groove for heatpipe b frontside heatsink frontside heatsink base heatpipe b bolt b (8 mm) frontside heatsink heatpipe a backside heatsink groove for heatpipe a loosely screw on the frontside heatsink onto the frontside heatsink base. (heatpipe a should be able t...

  • Page 12

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 12 heatpipe b heatpipe a groove for heatpipe a groove for heatpipe b backside heatsink backside heatsink base bolt b( 8 mm) backside heatsink heatpipe b heatpipe a bolt b (8 mm) heatpipe cover 1) place the backside heatsink between heatpipe a and the backs...

  • Page 13

    Www.Zalman.Co.Kr www.Zalmanusa.Com 13 frontside heatsink backside heatsink frontside heatsink backside heatsink front front back back make sure that both heatsinks are parallel with the vga card, and that side edges of the heatsinks are aligned. (if the heatsinks are not properly aligned, they need ...

  • Page 14

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 14 front back (o) (x) (x) 1) the heatpipes installed on the vga card should look exactly like the diagram below labeled (0). Check the diagram to make sure they have been correctly installed. 2) make sure the thermal grease has been applied properly. Appli...

  • Page 15

    Www.Zalman.Co.Kr www.Zalmanusa.Com 15 bolt c channel channel bolt c bolt a nut b nut b plate spring plate spring 1) for the frontside heatsink base : assemble bolt c and nut b with the plate spring and insert this assembly into the side channel on the frontside heatsink base. 2) for the backside hea...

  • Page 16

    Zm80d-hp www.Zalman.Co.Kr www.Zalmanusa.Com 16 power supply zm400b-aps hdd cooler zm-2hc2 northbridge cooler zm-nb47j noiseless fan zm-f1 cnps6000 series cnps6500b series cnps7000 series to build a noiseless computer, use zalman’s noiseless power supply (zm400b-aps) cpu coolers, noiseless northbridg...