Zamel ROP-03 Manual

www

.ledix.pl

2-channel radio

flush receiver

ROP-03

Zamel Sp. z o.o.

PL 43-200 Pszczyna, ul. Zielona 27, Poland

tel: +48 32 449 15 00, fax: +48 32 449 15 02

e-mail: ledix@ledix.pl, www.ledix.pl

10÷14 V DC / 0,7 W; IP20

weight: 36 g

Declaration of Conformity is on www.ledix.pl

2-channel radio flush receiver

ROP-03

The symbol means selective collecting of electrical and electronic equipment.

It is forbidden to put the used equipment together with other waste.

ROP-03 receiver is designed to carry out simple control functions in the low-voltage instal-

lations from 10 ÷ 14 V DC. In connection with EXTA FREE system transmitters it enables the 

realisation of the switch on/switch off function, the monostable mode, the bistable and 

time modes. The receiver is recommended for use with LED diode lighting.

Characteristic features:

•  cooperation with wireless EXTA FREE system transmitters,

•  independent control of up to two receivers in the following modes: switch on/switch off, 

monostable, bistable, time,

•  2 relay potential free outputs (NO) with a maximum capacity of 5 A for 250 V AC,

•  wide operation range (up to 230 m outdoors),

•  small dimensions - suitable for mounting in a typical Ø60 junction box,

•  low power consumption in the standby mode (0.15 W) - the receiver is used to a continu-

ous operation.

Mounting in a Ø60 

junction box

Mounting

indoor only

Co-operation 

with EXTA FREE 

transmitters

ROP-03 ENG  Ver. 01

SCAN

the technical

data

10 

÷

 14 V DC

CET Lighting Sp. z o.o. declares that the equipment complies with the principal requirements 

and other applicable rules of the RTTE Directive.