KŸhlschrank rŽfrigŽrateur koelkast refrigerator zanker cl 231 gebrauchsanweisung mode dÕemploi gebruiksaanwijzing instruction booklet 2222 063-83.
10 warnings it is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order ...
11 contents warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 use / cleaning the interior - operation - temperature regulation - fresh food refrigeration . . . . . . . . . . Movable shelves - pos...
12 positioning the door shelves to permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. D338 movab...
13 maintenance unplug the appliance before carrying out any maintenance operation. Warning this appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Periodic cleaning clean the inside with warm water and bicarbo...
14 installation location the appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. For safety reasons, minimum ventilation must be as shown in fig. Appliance positioned under overhanging kitchen wall units (see fig. A). Appliance positioned wit...
15 electrical connection before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used. The appli...
16 door reversibility 1. Unplug the appliance from the power supply before carrying out the below-mentioned operations. 2. Remove the bottom hinge (3).With pin (1) and feets (2) 3. Remove the door by releasing it from the top hinge pin (d). 4. Remove the pin (d) from the top hinge ), then mount thes...
