ZANKER DE6444 Instruction Book - The Control Panel
Function buttons:
in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- the setting of the water softener,
- the cancelling of a programme in progress.
Programme selection buttons:
the selection of a
washing programme occurs by pressing one of these buttons
(see "Washing programmes" chart).
«Half load» button:
this option is useful and economical
when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
The corresponding indicator light will illuminate.
Load the dishes into both baskets (lower basket and upper
basket).
With the selection of this option, the prewash phase is
automatically excluded with programmes Intensive 70°C and
Normal 65°C.
(In this case the detergent dose for the prewash
phase is no longer necessary).
The duration of the washing phase with programme Eco 50°C
will be reduced.
With programmes Rinse and Hold and Quick 60° A 30
I
it is
not possible to select the half load option (Button deactivated -
indicator light off).
When using this option we recommend to reduce the dose of
detergent that is normally used for a complete load.
«Delay start» button:
this option allows the start of the
programme to be delayed by 3, 6 or 9 hours.
Indicator lights:
have the following meanings:
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
The control panel
7
Function buttons
Programme selection
buttons
Indicator lights
Door handle
On/Off indicator light
On/Off button
Delay start button
Half load button
Programme in progress: illuminates when a
washing programme starts and remains
illuminated for all the duration of the washing
programme.
Turns off when the washing programme has
ended.
When delay start has been set, this indicator light
turns off and will come on again once the
countdown has elapsed and the washing
programme has started.
End of programme: illuminates when the washing
programme has ended, it also has added functions
of visual signalling as:
- the setting of the water softener,
- intervention of an alarm due to the malfunction
of the machine.
Rinse and Hold programme indicator light:
illuminates when the Rinse and Hold programme
has been set. (See "Washing programmes" chart
for the instructions about how to set the Rinse
and Hold programme).
Salt refilling indicator light, illuminates when the salt
has run out.
Rinse aid refilling indicator light, illuminates when
the rinse aid has run out.