- DL manuals
- ZANKER
- Washer
- FA 1032
- Instruction Booklet
ZANKER FA 1032 Instruction Booklet
Summary of FA 1032
Page 1
Washing machine pralka automatycza automatickÁ pracka automatickÁ prÁcka automata mosÓgÉp fa 832 - fa 1032 instruction booklet instrukcja obslugi nÁvod obsluze nÁvod na obsluhu hasznÁlati ÚtmutatÓ 132992650 pl cz sk h gb copertina 132992650 25/06/03 08:42 pagina 1.
Page 2: Contents
The symbols you will see on some paragraphs of this booklet have the following meaning: the warning triangle and/or the key words (warning!, caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. The information marked with this symbol...
Page 3: Warnings
3 installation • when unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the service centre. • all internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devic...
Page 4: Technical Specifications
4 dimensions height 85 cm width 60 cm depth 57 cm maximum load cotton 4.5 kg synthetics 2 kg delicates 2 kg woollens 1 kg spin speed 800 rpm max. (fa 832) 1050 rpm max. (fa 1032) power supply voltage/frequency 220-230 v/50 hz total power absorbed 2200 w minimum fuse protection 10 a water pressure mi...
Page 5: Installation
5 unpacking all transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the two rear bottom screws. Slide out the two plastic...
Page 6
6 the other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks the inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, yo...
Page 7: Your New Washing Machine
7 this new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • the temperature selector dial will allow you to choose the most suitable temperature for your laundry. • the automatic cooling of the washing water from 90° to 60°c...
Page 8: Use
8 use 1 detergent dispenser drawer 2 spin speed selector dial this dial has the following positions: • 0 = no spin; • 300 = min, for all fabrics; • 800 or 1000 = max, for cotton. For synthetics, delicates and wool the maximum position corresponds to 750 rpm. The intermediate positions refer to spin ...
Page 9: Washing Hints
9 washing hints sorting the laundry follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures 90° for normally soiled white cottons and linen (e.G. Tea cloths, towels, ...
Page 10
10 red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach. Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then ...
Page 11: Operating Sequence
11 4. Select the desired option depress the required button. 5. Select the spin speed or no spin option “0”. Turn the dial to the required setting. Fa 832 fa1032 6. Select the temperature turn the dial to the required setting. 7. Select the programme and start the machine turn the programme selector...
Page 12
12 8. At the end of the programme the machine stops automatically. The mains on light goes out. If you have selected a programme which ends with the water of the last rinse left in the tub (button depressed), drain the water before opening the door. Depress button again, the machine will drain and s...
Page 13: Programme Table
13 programme table washing programmes for cotton and linen max. Load: 4.5 kg the temperatures indicated are the optimum temperatures for each programme and depend on the type of laundry and degree of soiling. In compliance with ec directive 92/75, the consumption figures indicated on the energy labe...
Page 14: Programme Table
14 programme table the temperatures indicated are the optimum temperatures for each programme and depend on the type of laundry and degree of soiling. * the consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on th...
Page 15: Maintenance
15 bodywork clean the outside of the machine with soap and water only. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. Door seal check from time to time the door seal and eliminate eventual possible objec...
Page 16
16 • remove any objects from the pump impeller by rotating it. • put the cap back on the emergency emptying hose and place the latter back in its seat. • screw the pump cover fully in. • close the pump door. Water inlet filter if you notice that the machine is taking longer to fill, check that the f...
Page 17: Something Not Working?
English 17 something not working? Problems which you can resolve yourself. Problem possible cause • the machine does not start up: • the door is not firmly closed. • the machine is not plugged in or there is no power at the socket. • the main fuse has blown. • the programme selector dial is not posi...
Page 18
18 if you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the service centre will require this information. Mod. .......... Prod. No. ........... Ser. No. ......... M od . ....... ...