ZANKER FR161 Instruction Booklet

Manual is about: Freezer FR 161

Summary of FR161

  • Page 1

    Gefrierschrank congŽlateur vrieskast freezer zanker fr 161 gebrauchsanweisung mode dÕemploi gebruiksaanwijzing instruction booklet 2222 321-33.

  • Page 2: Warnings

    11 warnings it is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order ...

  • Page 3: Contents

    12 contents warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 use - control panel - cleaning the interior - operation -temperature regulation - fast freezing . . . . . . . Warning light - thermom...

  • Page 4: Use

    13 warning light warning light (e) lights up when the temperature inside the freezer compartment has increased to a value which jeopardizes the long-term storage of food in the compartment. When the appliance is switched on for the first time or when food is placed in the compartment for freezing, i...

  • Page 5

    14 ice-cube production this appliance is equipped with one or more trays for the production of ice-cubes. Fill these trays with water, then put them in the freezer compartment. Do not use metallic instruments to remove the trays from the freezer. Thawing deep-frozen or frozen food, prior to being us...

  • Page 6: Maintenance

    15 maintenance unplug the appliance before carrying out any maintenance operation. Warning this appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Periodic cleaning clean the inside with warm water and bicarbo...

  • Page 7

    16 customer service and spare parts if the appliance is not functioning properly, check that: ¥ the plug is firmly in the wall socket and the mains power switch is on; ¥ there is an electricity supply (find out by plugging in another appliance); ¥ the thermostat knob is in the correct position. ¥ if...

  • Page 8: Installation

    17 electrical connection before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used. The appli...

  • Page 9

    18 door reversibility 1. Unplug the appliance from the power supply before carrying out the below-mentioned operations. 2. Remove the bottom hinge (3).With pin (1) and feets (2) 3. Remove the door by releasing it from the top hinge pin (d). 4. Remove the pin (d) from the top hinge ), then mount thes...