ZANKER KWF 71411 WE User Manual

Summary of KWF 71411 WE

  • Page 1

    User manual washing ma- chine kwf 71411 we.

  • Page 2: Contents

    Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 install...

  • Page 3

    • after having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall. • install the appliance on a flat hard floor. • never place cardboard, wood or similar materials un- der the appliance to co...

  • Page 4: Frost Precaution

    To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is verti- cal. Frost precautio...

  • Page 5: Product Description

    >pe >ps >pp this means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints to save water, energy and to help protect the environ- ment, we recommend that you follow these tips: • normally soiled laundry may be washed without pre- washing in ...

  • Page 6: Installation

    Water supply pressure minimum maximum 0,05 mpa 0,8 mpa maximum load cotton 7 kg spin speed maximum 1400 rpm installation unpacking warning! • read carefully the "safety information" chapter before installing the appliance. X 3 x 3 x 2 x 1 b a c warning! Remove and keep all transit devi- ces so that ...

  • Page 7

    • remove the power supply cable and the draining hose from the hose holders (c) on the rear of the appliance. • unscrew the three bolts (a) and remove the hose holders (c). • slide out the relevant plastic spacers (b). Warning! Do not remove the drain hose from the rear sup- port. Remove this hose o...

  • Page 8

    Level the appliance by raising or lowering the feet. The appliance must be level and stable on a flat hard floor. If necessary, check the setting with a spirit level. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and dis- placement of the appliance...

  • Page 9

    Tie the plastic hose guide to the tap with a string to prevent that the drain hose unhooks when the appli- ance is emptying. • onto a sink outlet spigot. Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose to prevent waste from the sink entering the ...

  • Page 10: First Use

    Electrical connection • the appliance must be earthed. • make sure that the electrical information on the rat- ing plate agree with your domestic power supply. • always use a correctly installed shockproof socket. • do not use multi-way plugs, connectors and exten- sion cables. There is a risk of fi...

  • Page 11

    Before loading the laundry important! Make sure that no metal objects are left in the laundry (e.G. Hair clips, safety pins, pins). Button up pillowca- ses, close zip fasteners, hooks and poppers. Tie any belts or long tapes. Remove any hooks (e.G curtains). • never wash whites and coloureds togethe...

  • Page 12

    Detergents and additives good washing results also depend on the choice of de- tergent and use of the correct quantities to avoid waste and protect the environment. Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate bal- ance of nature. The choic...

  • Page 13

    The flap is down and you wish to use powder de- tergent: • rotate the flap up- wards. Ensure to fit the flap completely in. • carefully put the draw- er back. • measure out the de- tergent. • pour the powder de- tergent into the main wash compartment . The flap is up and you wish to use liquid deter...

  • Page 14

    1 2 3 4 5 6 7 9 10 8 1 programme selector dial turn the programme selector dial to the required programme. The selector dial can be turned either clockwise or counter-clockwise. The green pilot light of the button 9 starts flashing: the appliance is now switched on. If you turn the programme selecto...

  • Page 15

    3 spin reduction by selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant light illuminates. 4 rinse hold by pressin...

  • Page 16

    7 display 7.1 7.2 7.3 the display shows the following information: 7.1 delay start icon 7.2 child safety lock this device permits you to leave the appliance unattended during it's functioning. 7.3 • duration of the selected programme after selecting a programme, the duration is displayed in hours an...

  • Page 17

    You can cancel or modify the delay time at any moment, before you press button 9. Selecting the delay start : • select the programme and the required options. • select the delay start by pressing button 8. • press button 9: – the appliance starts its hourly countdown. – the programme will start afte...

  • Page 18: Washing Programmes

    10 door light the pilot light 10 illuminates when the programme starts and indicates if the door can be opened: • light on: the door cannot be opened. The appliance is working or has stopped with water left in the tub. • light off: the door can be opened. The programme is finished or the water has b...

  • Page 19

    Programme - maximum and minimum temperature - cycle description - maximum spin speed - maximum fabrics load - type of laundry options detergent com- partment koch-/buntwÄsche mit vorwÄsche 95° - cold prewash - main wash - rinses - maximum spin speed at 1400 rpm max. Load 7 kg - reduced load 3,5 kg w...

  • Page 20

    Programme - maximum and minimum temperature - cycle description - maximum spin speed - maximum fabrics load - type of laundry options detergent com- partment spÜlen rinse - short spin speed 700 rpm. If a spin speed higher than 700 rpm is selected, by pressing the relevant button, the appli- ance per...

  • Page 21: Consumption Values

    Programme - maximum and minimum temperature - cycle description - maximum spin speed - maximum fabrics load - type of laundry options detergent com- partment leichtbÜgeln 60°- cold main wash - rinses - maximum spin speed at 900 rpm pflegeleichte textilien, die sanft gewaschen und geschleu- dert werd...

  • Page 22: Care And Cleaning

    Standard programmes for the energy label consumption values the cotton 60 °c economy and cotton 40 °c economy are the standard cotton programmes for normally soiled cotton laundry. They are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combin...

  • Page 23

    • turn the drum and align the filter cover (filter) with the ar- row on the door seal; • open the filter cover by pressing the spe- cial hook and by rotat- ing the cover upwards; warning! Keep the filter cover open un- til the filter removal. • before removing the filter, remove any fluff or small o...

  • Page 24: What To Do If…

    • unscrew the hose from the appliance. Keep a towel nearby because some water may flow. • clean the filter in the valve with a stiff brush or with the piece of cloth. • screw the hose back to the appliance and make sure the connection is tight. • turn on the water tap. What to do if… the appliance d...

  • Page 25

    Fault code and malfunc- tion possible cause / solution problem with the water drainage the drain hose is squashed or kinked. • check the drain hose connection. The drain filter is clogged. If the appliance stops working without discharging the water , first carry out an emergency drain: • turn the p...

  • Page 26

    Malfunction possible cause / solution the appliance does not start: the plug is not properly inserted in the power socket. • insert the plug into the power socket. There is no power at the socket. • please check your domestic electrical installation. The main fuse has blown. • replace the fuse. The ...

  • Page 27

    Malfunction possible cause / solution the appliance vibrates noisily: the transit bolts and packing have not been removed. • check the correct installation of the appliance. The appliance is not levelled correctly. • adjust the feet. The laundry is not evenly distributed in the drum. • redistribute ...

  • Page 28

    Mod. ... ... ... Pr od. No. ... ... ... Ser . No. ... ... ... Mod . .. . ... .. . P rod. N o . ... ... .. S er . No . ... .. . ... Model description (mod.) ............................... Product number (pnc) ................................... Serial number (s.N.) .....................................

  • Page 29

    29.

  • Page 30

    30

  • Page 31

    31.

  • Page 32

    Www.Electrolux.Com/shop 192986750-a-372011.