Geschirrspüler zkdw 14 dishwasher bedienungsanleitung (teil 2) 2 instruction book (part 2) 9.
9 the control panel 1. On/off indicator light 2. On/off push button 3. Programme guide 4. Door handle 5. Programme marker 6. Programme selector dial 7. Programme sequence indicator as the programme progresses, the programme selector dial turns, to show the phase in the wash programme the appliance h...
10 washing programmes programme degree of soil and type of load required push buttons recommended quantity of detergent wash prewash starting position of the programme selector normal soil. Crockery and cutlery light soil. Crockery and cutlery light soil. Crockery and party crockery any. Partial loa...
11 1. Check the filters ensure that they are clean and properly positioned. (see "maintenance and cleaning" - instruction book - part 1) 2. Check that there is rinse aid and salt (see instruction book - part 1) 3. Load the dishes remove any scraps of food. Pull the lower basket out and arrange the s...
12 loading your appliance before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket the lower basket is designed to take saucepans, lids, ...
13 the upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items so that water can reach all surfaces. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so th...
Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Hints for test centres test standard: en 50242 reference programme: normal 65°c with prewash load: 12 standard place settings rinse aid selector: position 5 detergent ...
15 fitting under a counter (kitchen worktop or sink) by removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture. Proceed as follows: - remove the machine’s worktop by uns...
Gb d 152976 48/0 0 08/01.
