ZANKER ZKK8021 User Manual - page 35

35

B

E

E

D

C

Apply covers (C-D) on joint cover lugs and into hinge

holes.

Snap vent grille (B) and hinge covers (E) into

position.

PR266

Ha

Hb

Hc

Hd

Separate parts Ha, Hb,Hc, Hd as shown in the figure

Place guide (Ha) on the inside part of the furniture

door, up and down as shown in the figure and mark

the position of external holes. After having drilled

holes, fix the guide with the screws supplied.

21 mm

21 mm

ca. 50 mm

90°

90°

ca. 50 mm

Apply the sealing strip pushing it between the

refrigerator and the adjacent cabinet.

D724

From the plastic cover (E), which is used to cover the

hinge with the pivot pin, you must take away the part as

indicated in the drawing.

This operation is made easer since there is, in the

internal part of the cover hinge lid a groove that facilates

the removal of this coomponent.

“Remove the part marked with DX, if the pivot pin is

inserted in the right hinge, SX in opposite case.”