ZANKER ZKK8409 Instruction Manual - Disposal

14

Instructions for the use of the instructions booklet

Notes which are important for your safety or for the proper functioning of the appliance

Supplementary information regarding operation and practical applications of the appliance.

Tips and notes concerning economical and environmentally sound use of the appliance

Disposal

Appliance Packaging Information

• The materials used on this appliance marked with the symbol 

are recyclable.

>PE<=polyethylene

>PS<=polystyrene

>PP<=polypropylene

All materials are environmentally sound! Information concerning collection schedules or locations can be

obtained from your local Council or Environmental Health Office.

Refrigerator compartment

Starting the appliance

• Insert the plug into the wall socket and turn the

thermostat knob clockwise beyond position «O»

(OFF).

• Turn the thermostat control to the required setting.

Temperature Control

• The thermostat control situated inside the fridge

compartment regulates the temperature of the

appliance.

• It allows you to adjust the temperature inside the

refrigerator according to use and external

conditions.

•  Setting „1“ = hightest temperature, warmest 

setting

•  Setting „6“ = lowest temperature, coldest 

setting.

• Setting „0“ = Off

A medium setting is generally the most suitable.

Internal Parts

Storage shelves

• The shelves can be removed for cleaning.

Disposal of old appliances

The symbol 

on the product or on its packaging indicates that this product may not be treated as

household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service or the shop where you purchased

the product.

Use and Control

Before Use

Wait two hours before connecting the

appliance to allow the oil to flow back in the

compressor.

• Before using the appliance for the first time, wash

the interior and all internal accessories with

lukewarm water and some neutral soap so as to

remove the typical smell of a brand-new product,

then dry thoroughly.

Do not use detergents or abrasive

powders, as these will damage the finish.

• Remove safety elements used for transportation.