ZANKER ZKK8417K User Manual - page 43

43

Fix cover (Hd) on guide (Hb) until it clips into place.

Place the small square on the guide again and fix it

with the screws supplied.

Should the lining up of the furniture door be

necessary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.

PR168

Hb

PR167/1

Hd

Hb

Remove the brackets and mark a distance of 8 mm

from the outer edge of the door where the nail must

be fitted (K).

Ha

8mm

K

D

E

D734

If the appliance is fixed to the side of the kitchen unit,

simply slacken the screws in the fixing brackets (D),

move the brackets as shown in figure and re-tighten the

screws. Fit cover (E).