Kühlschränke zanker zkk 9010 réfrigérateurs zkk 9012 koelkasten refrigerators gebrauchsanweisung mode d’emploi gebruiksaanwijzing instruction booklet 2222 146-91.
37 warnings general safety ª this appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product. ª it is dangerous to alter the specifications or modify this product in any way. ª care must be taken to ensure that the appliance do...
38 installation ª during normal operation, the condenser and compressor at the back of the appliance heat up considerably. For safety reasons, minimum ventilation must be as shown in the relevant figure. Attention: keep ventilation openings clear of obstruction. ª if the appliance is transported hor...
39 contents installation 40 ª positioning 40 ª cleaning the interior 40 ª instructions for totally built-in appliances 41 ª electrical connection 43 technical specification 43 use 44 ª operation 44 ª temperature regulation 44 ª fresh food refrigeration 44 ª movable shelves 45 ª positioning the door ...
40 installation if this appliance featuring magnetic door seals is to replace an older appliance having a spring lock (latch) on the door or lid, be sure to make that spring lock unusable before you discard the old appliance. This will prevent it from becoming a death-trap for a child. Positioning t...
41 instructions for totally built-in appliances dimensions of the recess model zkk 9010 zkk 9012 height 1030 mm 1225 mm depth 550 mm 550 mm width 560 mm 560 mm the appliance’s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remo...
42 press in the joint covers between the appliance and the kitchen unit. Apply covers (b) on joint cover lugs and into hinge holes. Position the runners (h) at the top and bottom of the inside of the kitchen unit as shown in fig. 6 and mark the position of the external holes. After preparing the hol...
43 remove the little plates and make the holes with a diam. Of 2 mm. Replace the little plates over the runners and screw in the screws provided (3.5x16 mm). For the alignment of the kitchen unit door, if necessary, use the clearance size of the slotted holes. At the end of the procedure, check that...
44 use operation insert the plug into the wall socket. Open the refrigerator door and turn the thermostat knob, clockwise, beyond the « o» (stop) position. The appliance will start to operate. Temperature regulation the temperature is automatically regulated and can be increased to achieve a higher ...
45 movable shelves the walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves to permit storage of food packages of various sizes, the d...
46 maintenance unplug the appliance before carrying out any maintenance operation. Warning this appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians. Periodic cleaning never use metal objects for cleaning your ap...
