1. DL manuals
  2. ZANKER
  3. Dishwasher
  4. ZKS 5619 SX
  5. Instruction Book

ZANKER ZKS 5619 SX Instruction Book

Manual is about: ZKS 5619 SX Dishwasher

Summary of ZKS 5619 SX

  • Page 1

    Geschirrspüler zks 5619 sx dishwasher bedienungsanleitung instruction book.

  • Page 2: Contents

    25 for the user important safety information 26 description of the appliance 27 the control panel 27 before use 28 setting the water softener 28 rinse aid 30 using your appliance 31 loading your appliance 31 adjusting the height of the upper basket 32 use of detergent 33 hints and tips 34 washing pr...

  • Page 3: Important Safety Information

    26 installation ● this appliance is heavy. Care should be taken when moving it. ● it is dangerous to alter the specifications or attempt to modify this product in any way. ● care must be taken to ensure that the appliance does not stand on the electrical supply cable. ● any electrical work required ...

  • Page 4: Description of The Appliance

    27 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Large filter 11. Central filter 12. Upper spray arm 13. Upper basket 1. On/off indicator light 2. On/off p...

  • Page 5: Before Use

    28 before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. ...

  • Page 6

    29 filling with salt only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the ...

  • Page 7

    30 rinse aid rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage sett...

  • Page 8: Using Your Appliance

    31 loading your appliance before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket the lower basket is designed to take saucepans, lids, ...

  • Page 9

    32 the upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces. Light items (plastic bowls etc.) should be loa...

  • Page 10

    33 use of detergent only use detergents specifically designed for use in dishwashers. If using powder detergents proceed as follows: 1. Open the dispenser lid by pulling the catch (d). 2. Add the detergent. As all detergents are not the same, you should consult the instructions on the packet. 3. Alw...

  • Page 11: Hints and Tips

    34 to save energy place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the rinse and hold programme (see "washing programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the c...

  • Page 12: Washing Programmes

    35 programme degree of soil and type of load starting position of the programmer required pushbuttons cycle description pro35en washing programmes normal 65°c with prewash intensive 70°c rinse and hold hot prewash main wash up to 70°c 2 cold rinses 1 hot rinse drying cold prewash main wash up to 65°...

  • Page 13: Operating Sequence

    36 1. Check the filters ensure they are clean and properly positioned (see "maintenance and cleaning"). 2. Check that there is rinse aid and salt 3. Load the dishes remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and...

  • Page 14: Maintenance and Cleaning

    37 internal cleaning ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°c wash programme without dishes using detergent. Cleaning the central filter (after each wash) scraps of food may accumu...

  • Page 15

    38 external cleaning clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of non-operation if you are not using the ...

  • Page 16: Something Not Working

    39 certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local service force centre, please carry out the checks listed below. Rim05en something not working symptom solution the machine will not start ...

  • Page 17

    40 if after all these checks, the problem persists, contact your local service force centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding in order to prevent wat...

  • Page 18: Hints For Test Centres

    41 hints for test centres before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Ist33en test standard en 50242 reference programme: bio 50°c with prewash load: 12 standard place settings rinse aid selector: position 5 det...

  • Page 19: Installation Instructions

    42 remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections this dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always ef...

  • Page 20

    43 water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm ...

  • Page 21: Building-In

    44 this dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable p...

  • Page 22

    45 the furniture door plinth the door on this appliance is designed for the overlay of a door plinth having the following dimensions: width: 596 mm height: 50 mm (min) - 120 mm (max) thickness: 20 mm max the panel height should be no more than indicated, otherwise complete opening of the door will n...

  • Page 23

    46 fitting the vapour protection screw the vapour protecting strip onto the front part of the worktop using four 3,5 x 16 screws. Fitting the sealing strips to the sides of the appliance to ensure closer contact with adjacent kitchen units, fit the plastic sealing strips down both sides of the front...

  • Page 24

    47 noise protection adhesive noise protection ensures excellent noise insulation. This should be fitted when the dishwasher has been mounted in the recess and the height adjusted. Apply the protection as shown in the drawing, making sure that the non-adhesive section reaches right down to the floor....

  • Page 25

    Gb d 152983 57/0