- DL manuals
- ZANKER
- Dishwasher
- ZKS 5619
- Instruction Book
ZANKER ZKS 5619 Instruction Book
Summary of ZKS 5619
Page 1
Geschirrspüler zks 5619 dishwasher bedienungsanleitung instruction book.
Page 2: Contents
For the user important safety information 27 description of the appliance 28 the control panel 29 before use 30 setting the water softener 30 rinse aid 32 use of detergent 33 using your appliance 34 loading your appliance 34 adjusting the height of the upper basket 35 hints and tips 36 washing progr...
Page 3: Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new own...
Page 4: Description of The Appliance
Description of the appliance 28 pda18gb 2 3 4 5 6 8 9 10 11 12 in85 13 1 7 1. Water hardness adjustment 2. Levelling spacers 3. Upper basket stop 4. Salt container 5. Lower spray arm 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Large filter 11. Central filter 12...
Page 5: The Control Panel
1. On/off indicator light 2. On/off pushbutton on by depressing this button the machine starts operating and, at the same time the on/off indicator light illuminates. Off when the washing programme has finished, the machine stops automatically and the pilot light remains on. To switch the indicator ...
Page 6: Before Use
Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Fill the salt container 5. Fill the rinse aid dispenser. Setting the water sof...
Page 7
Filling with salt if your water is "level 0" it is already soft and therefore there is no need to use salt. Salt must be used from level 1 upward. Only use salt specifically designed for use in dishwasher. All other types of salt not specifically designed for use in dishwasher, specially table salt,...
Page 8
Rinse aid rinse aid is automatically added during the last rinse, ensuring through rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Fil...
Page 9
Use of detergent only use detergents specifically designed for use in dishwashers. To fill the dishwasher with detergent proceed as follows: 1. Open the dispenser lid by pulling the catch (d). 2. Add the detergent according to the recommendations in the programme chart. As all detergents are not the...
Page 10: Using Your Appliance
Loading your appliance before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower bask...
Page 11
The upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Glasses with long stems can be placed upside down in the raised cup racks. Light items (plastic bowls etc.) should be loaded in the upper baske...
Page 12: Hints and Tips
To save energy place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the rinse and hold programme (see "washing programmes" chart on the following pages), so that any food scraps do not become caked on the dishes while you are...
Page 13: Washing Programmes
Washing programmes 37 pwp07/1gb programme degree of soil and type of load heavy soil. Crockery, cutlery pots and pans normal soil. Crockery, cutlery pots and pans light soil. Crockery and cutlery normal soil. Crockery and cutlery light soil. Crockery and cutlery light soil. Crockery and party crocke...
Page 14: Operating Sequence
1. Check the filters ensure they are clean and properly positioned (see cleaning instructions). 2. Check that there is rinse aid and salt 3. Load the dishes remove any scraps of food. Pull the lower basket out and arrange the saucepans, plates and cutlery in it. Pull the upper basket out and arrange...
Page 15: Maintenance and Cleaning
Internal cleaning ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run a 65°c wash programme without dishes using detergent. Cleaning the central filter (after each wash) scraps of food may accumulat...
Page 16
External cleaning clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of non-operation if you are not using the mac...
Page 17: Something Not Working
Symptom solution the machine will not start ■ the door has not been properly closed. ■ the plug is not properly inserted in the power socket. ■ there is not current at the socket. The dishwasher does not fill with water ■ ensure the water tap is open. ■ ensure the mains water supply has not been cut...
Page 18
If after all these checks, the problem persists, contact your local service force centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Protection against flooding in order to prevent water ...
Page 19: Installation Instruction
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications installation instruction 43 pts...
Page 20
Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections this dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always effic...
Page 21
Water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet siphon, securing it if necessary with a clip. 2. To a stand pipe provided with vent-hole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (mi...
Page 22: Building-In
This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass...
Page 23
The furniture door the door on this appliance is designed for the overlay of a panel having the following dimensions: width 596 mm height 604 mm max thickness 20 mm max weight 2 - 7.5 kg max the panel height should be no more than indicated, otherwise complete opening of the door will not be possibl...
Page 24
Fitting the vapour protection screw the vapour protecting strip onto the front part of the worktop using four 3.5 x 16 screws. Fitting the sealing strips to the sides of the appliance to ensure closer contact with adjacent kitchen units, fit the plastic sealings strips down both sides of the front o...
Page 25
Noise protection adhesive noise protection ensures excellent noise insulation. This should be fitted when the dishwasher has been mounted in the recess and the height adjusted. Apply the protection as shown in the drawing, making sure that the non-adhesive section reaches right down to the floor. Ki...
Page 26
152991 38/2 2/1198 total chlorine fr ee de en.