- DL manuals
- ZANKER
- Dishwasher
- ZKS 5640
- Instruction Book
ZANKER ZKS 5640 Instruction Book
Summary of ZKS 5640
Page 1
Geschirrspüler zks 5640 dishwasher bedienungsanleitung seite 2 instruction book page 19.
Page 2: Contents
19 this appliance complies with the following e.E.C. Directives: - 73/23 or 19.2.73 (low voltage directive) and subsequent modifications; - 89/336 or 3.5.89 (electromagnetic compatibility directive) and subsequent modifications. Dimensions width 59.6 cm height 81.8 - 87.8 cm max depth 55.5 cm max de...
Page 3: Disposal
20 installation ● check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact your supplier. ● for safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. ● any electrical and plum...
Page 4: Installation Instructions
21 any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Building-in this dish...
Page 5
22 water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the specia...
Page 6: Description of The Appliance
23 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket description of the appliance in153 the control panel on/off push button indicator light...
Page 7
24 prior to using for the first time before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt con...
Page 8
25 filling with salt only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This wil...
Page 9
26 if you are using dishwasher detergent that includes the rinse aid function, this must be placed in the detergent compartment. In this case the inflow of the rinse aid must be deactivated, in order to avoid a double dosage . Deactivation/activation of the inflow of rinse aid (the dishwasher must b...
Page 10: In Daily Use
27 open the door and slide out the baskets to load the dishes. The lower basket the lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc. Serving dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely. The cu...
Page 11
28 the upper basket the upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water can reach all surfaces. Glasses with long stems can be placed upside down in the...
Page 12: Different Kinds of Detergent
29 use of detergent only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Prior to the start of a wash programme.The detergent is released during the washing phase. Please observe the manufacturer’s dos...
Page 13: Washing Programmes
30 washing programmes programme degree of soil and type of load heavy soil. Crockery, cutlery, pots and pans normal soil. Crockery and cutlery normal soil. Crockery and cutlery fresh soil. Crockery and cutlery press the programme button cycle description (3) consumption values hot prewash main wash ...
Page 14: Starting A Washing Programme
31 in this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Press the on/off push button all th...
Page 15: Maintenance and Cleaning
32 clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers ...
Page 16: What to Do, When...
33 what to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...A flashing fault code appears the dishwasher will not start or stops during operation. All push butto...
Page 17
34 ...The wash results are not satisfactory the dishes are not clean ● the wrong washing programme has been selected. ● the dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● the spray arms do not rotate freely due to wrong ar...
Page 18: Hints For Test Centres
35 testing in accordance with en 60704 must be carried out with appliance fully loaded and using the test programme (see "washing programmes" chart). Test in accordance with en 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respecti...
Page 19
Gb d 152968 81/0 0 08/03.