Summary of ZKV1530
Page 1
User manual dishwasher zkv1530
Page 2: Appliance
Thank you for selecting our appliance we wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document. The user ...
Page 3: Safety Information
Safety information in the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, in- cluding its hints and warnings. To avoid unnec- essary mistakes and accidents, it is important to ensure that all people using the ap...
Page 4: Installation
Installation • check your dishwasher for any transport damage. Never connect a damaged ma- chine. If your dishwasher is damaged con- tact your supplier. • all packaging must be removed before use. • any electrical and plumbing work required to install this appliance must be carried out by a qualifie...
Page 5
Important! Always remember that when performing oper- ations such as: • selecting a washing programme • setting the water softener • deactivation/activation of the audible signals the appliance must be in setting mode. If a programme light is illuminated and end of programme light is illuminated wit...
Page 6
Programme selection/cancel button • starting the washing programme: 1. Press the on-off button. 2. Press the programme selection/cancel button once, the light of the last performed washing pro- gramme illuminates and the end of programme light flashes. 3. Press the programme selection/cancel button ...
Page 7: Audible Signals
Indicator lights saltindicator light illuminates when the special salt has run out. Is never illuminated while a washing programme is running. Audible signals audible signals have been introduced to help indicate which operations the dishwasher is performing. – end of the washing programme, – malfun...
Page 8: First Use
Programme degree of soil type of load programme description normal 65° normal soil crockery, cutlery, pots and pans prewash main wash 2 intermediate rinses final rinse drying eat - load - run 1) 30 min. Light soil crockery and cutlery main wash final rinse bio 50° 2) normal soil crockery and cutlery...
Page 9: Salt Function and Other
Salt function and other additives: there is no need to fill up with special salt or rinse aid. Check whether these detergents are suitable for your water hardness. Follow the manufac- turers instructions. – set the water hardness to level 1. Important! If the drying results are not satisfactory we r...
Page 10: Setting The Water Softener
Water hardness adjusting the water hardness setting use of salt °dh °th mmol/l manually electronically 1 level 1 no setting the water softener manually (see table) set switch to position 1 or 2 the water softener is factory set at position 2. Setting the water softener electronically (see table) 1. ...
Page 11
Unscrew the cap. Only before filling with salt for the first time, fill the salt container with wa- ter. Using the funnel provided, pour in the salt until the container is filled with salt. Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. Important!...
Page 12: Filling With Rinse Aid
Filling with rinse aid open the lid. Fill up with rinse aid. The maximum level for filling is indicated by "max" clean up any rinse aid which overflows. Close the lid and press until it locks. Top up the rinse aid indica- tor (b) becomes clear caution! Never fill the rinse aid dispenser with any oth...
Page 13: Loading Cutlery and Dishes
Open the lid. Set the dosage level. (the dose is factory set in po- sition 4). Close the lid and press un- til it locks. Loading cutlery and dishes sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. • before loading the dishes, you should: – remove al...
Page 14
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • cutlery with wooden, horn, china or mother-of- pearls handles. • plastic items that are not heat resistant. • older cutlery with glued parts that are not temper- ature resistant. • bonded c...
Page 15: Adjusting The Height of The
Load upper basket. Light items (plastic bowls etc.) must be loaded in the up- per basket and arranged so they do not move. For taller items, the cup racks can be folded up- wards. If plates are to be loaded in the upper basket: load them starting from the rear positions; tilting them slightly forwar...
Page 16: Use of Detergent
Important! Never lift or lower the basket on one side only important! When the basket is in the higher position you will not be able to use the cup racks. Use of detergent important! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and stor- age recommendations. Open t...
Page 17: Care and Cleaning
The dishes should therefore be allowed to cool down before removing from the appli- ance. • empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. • water may appear on the sides and the door of the dishwasher as th...
Page 18: Cleaning The Spray Arms
Put the flat filter a back in the base of the washing compartment and ensure that it fits perfectly under the two guidesd. Replace the filters and lock by turning the handle clockwise to the stop. Cleaning the spray arms never try to remove the spray arms. If residues of soil have clogged the holes ...
Page 19: Environment Concerns
3. Remove the water inlet and discharge ho- ses. 4. Pull the machine out together with the ho- ses. Avoid over tilting the machine during transpor- tation. Environment concerns the symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it...
Page 20
Fault code and malfunction possible cause and solution • continuous flashing of the start/cancel indicator light • 1 intermittent audible signal • 1 flash of the "end of cycle" indicator light the dishwasher does not fill with water. • the water tap is blocked or furred with limescale. Clean the wat...
Page 21: Consumption Values
Mod. :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pnc : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S.N. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The wash results are not satisfactory the dishes are not clean • the wrong washing programme has been...
Page 22: Technical Data
Consumption values programme programme duration (in minutes) energy consumption (in kwh) water (litres) intensive 70° 85-95 1,8-2,0 22-25 normal 65° 105-115 1,5-1,7 23-25 eat-load-run 65° 30 0,9 9 eco 50° (test pro- gramme for test insti- tutes) 140 1,05 16 rinse and hold 12 0,1 5 technical data dim...
Page 23: Installation
Upper basket cutlery basket lower basket cup racks: position a installation warning! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person. Water connection warning! This appliance can be connected...
Page 24: Drain Hose
If the water inlet hose leaks, the safety valve cuts off the water supply. Warning! The electrical cable for the safety valve is in the double-walled water inlet hose and is live. Therefore do not immerse the water inlet hose or the safety valve in water. Take care when installing the water inlet ho...
Page 25: Electrical Connection
Electrical connection caution! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be fo...
Page 26
26.
Page 27
27.
Page 28
Www.Electrolux.Com 156989550-00-042008.