- DL manuals
- Zanussi Electrolux
- Dishwasher
- DE 4855
- Instruction Book
Zanussi Electrolux DE 4855 Instruction Book
Summary of DE 4855
Page 1
GeschirrspÜler dishwasher de 4855 bedienungsanleitung seite 2 instruction book page 19 d gb.
Page 2: Contents
Safety instructions 20 disposal 20 economical and ecological dishwashing 20 installation instructions 21 fitting under a counter 21 levelling 21 water supply connections 21 water inlet hose with safety valve 21 water outlet hose connection 22 electrical connection 22 description of the appliance 23 ...
Page 3: Disposal
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new own...
Page 4: Installation Instructions
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Fitting under a counter ...
Page 5
Water outlet hose connection the end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. Hooked over the edge of the sink using the special c...
Page 6: The Control Panel
Function push buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons: - the setting of the water softener, - deactivation/activation of the inflow of rinse aid, - the cancelling of a programme in progress. Programme selectio...
Page 7
Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwasher ...
Page 8
B) setting electronically (the dishwasher must be switched off) the dishwasher is factory set at level 5. 1. Press the on/off push button. The on/off indicator light illuminates (setting mode). If a programme push button indicator light is on, this means that a washing programme has been set. The pr...
Page 9
Rinse aid rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting...
Page 10: In Daily Use
● check if it’s necessary to refill with dishwasher salt or rinse aid ● load cutlery and dishes into the dishwasher. ● fill with dishwasher detergent . ● select a wash programme suitable for the cutlery and dishes. ● start the wash programme. Loading cutlery and dishes sponges, household cloths and ...
Page 11
The cutlery basket long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. Forks and spoons should be placed...
Page 12: Different Kinds of Detergent
Use of detergent only use detergents specifically designed for use in dishwashers. Using no more then the correct amount of detergent contributes to reducing pollution. Prior to the start of a wash programme. The detergent is released during the washing phase. Please observe the manufacturer’s dosin...
Page 13: Washing Programmes
30 (1) ideal for washing crockery and cutlery of breakfast and dinner (fresh soil). This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery. (2) testing programme for en 50242 (see "hints for test centres")....
Page 14: Starting A Washing Programme
1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on the water tap 3. Close the dishwasher door 4. Press the on/off push button the on/off indicator light will come on (setting mode). 5. Setting and starting the programme a) press the push button ...
Page 15: Maintenance and Cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers are...
Page 16: What to Do, When...
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. What to do, when... 33 ...A flashing fault code appears the dishwasher will not start or stops during operation. All push butto...
Page 17
...The wash results are not satisfactory the dishes are not clean ● the wrong washing programme has been selected. ● the dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● the spray arms do not rotate freely due to wrong arran...
Page 18: Hints For Test Centres
Testing in accordance with en 60704 must be carried out with appliance fully loaded and using the test programme (see "washing programmes" chart). Test in accordance with en 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectivel...
Page 19
Änderungen vorbehalten subject to change without notice 152963 72/0 from the electrolux group. The world’s no.1 choice. The electrolux group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million electrolux group products (such as refrigerat...