Zanussi Electrolux Gas hobs Instruction Book

Manual is about: Zanussi Electrolux Gas hobs

Summary of Gas hobs

  • Page 1

    2 • this appliance has been designed to be operated by adults and children under supervision. Young children must not be allowed to tamper with the controls or play near or with the oven. • this appliance has been designed for cooking edible foodstuff and to be used for domestic non- professional pu...

  • Page 2: 1. Instruction For The User

    3 1. Instruction for the user hob burners control knobs the hob burners control knobs are situated on the hob right hand side. The symbols on the knobs mean that : ● there is no gas supply there is maximum gas supply there is minimum gas supply lighting the burners • for easier lighting, proceed bef...

  • Page 3

    4 pottery remember that a wide-bottomed pan allows a faster cooking than a narrow one. Always use pots which properly fit what you have to cook. Particularly make sure that the pans are not too small for liquids, since these could easily overflow. Moreover, the pans should not be too large for a fas...

  • Page 4: 2. Cleaning and Maintenance

    5 2. Cleaning and maintenance • disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Wash the enamelled components with warm soapy water. Never use abrasive cleaners frequently wash the "caps" and the "crowns" with hot soapy water, carefully taki...

  • Page 5: 4. Technical Data

    6 4. Technical data gas burners rating rapid (double crown) 3,5 kw auxiliary (small) 1 kw semirapid (medium) 2 kw category ii 2h3+ setting l.P.G. 28-30/37 mbar gas connection g 1/2" electric supply 230 v 50 hz hob recess dimensions length 560 mm.(60 cm hob) - 830 mm.(90 cm hob) width 480 mm. 5. Inst...

  • Page 6: 6. Electrical Connection

    7 6. Electrical connection the appliance is designed to be connected to 230 v ~ 50 hz electricity supply. The connection must be carried out in compliance with the laws and regulations in force. Before the appliance is connected: 1) check that the main fuse and the domestic installation can support ...

  • Page 7

    8 injectors replacement • remove the pan supports. • remove the burner's caps and crowns. • with a socket spanner 7 unscrew and remove the injectors (fig. 6), and replace them with the ones required for the type of gas in use (see table 2). • reassemble the parts, following the same procedu- re back...

  • Page 8: 8.  Building In

    9 8. Building in a = auxiliary burner sr = semirapid burner r = rapid burner (double crown) these hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in figures 8 to 11. Fig. 8 fig. 9 fo 0940 fo 0941 fig. 10 fig. 11 fo 0244 fo 0245 sr ...

  • Page 9

    10 installation and assembly these hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in fig. 12 and 13. The edge of the cut out must have a minimum distance from the rear wall of 55 mm. If there are side walls, or sides of the furniture unit near the ho...

  • Page 10

    11 360 cm 2 50 cm 2 120 cm 2 180 cm 2 30 20 min 60 a b 550 min. 560 min. Fig. 15 fig. 16 fig. 17 fig. 18 fig. 19 fig. 20 fo 1013 fo 2043 fo 0938 fo 0939 fo 0198 fo 2099 650 mm possibilities for insertion kitchen unit with door proper arrangements must be taken in designing the forniture unit, in ord...