26
Contents
This appliance complies with the following
E.E.C. Directives:
- 73/23 - 90/683 (Low Voltage Directive);
- 89/336 (Electromagnetical Compatibility Directive);
- 93/68 (General Directives)
and subsequent modifications.
For the User
For the Installer
Description of the appliance
1
2
3
4
5
6
7
1) Hob top
2) Rapid hot plate - 180 mm Ø
3) Rapid hot plate - 145 mm Ø
4) Normal hot plate - 145 mm Ø
5) Normal hot plate - 180 mm Ø
6) Control knobs
7) Pilot light
Operation
Before the first use
Before using the hob for the first time, switch it on for
about 10 minutes at the highest position.
When using the hob for the first time, unpleasant smells,
or smell of burnt material, might be smelt: this is
absolutely normal and it is due to the evaporation of
greasy working residues and of hte dope used during
the installation. These smells will vanish after some time
of working.
Use of electric plates
To switch on the plates, turn the relevant knob to the
required position.
Rapid hot Plate
This type is indicated by a red circle in the middle of the
plate.
The red circle is painted on and so will deteriorate and
may come off completely over a period of time.
A rapid plate will heat up much more quickly than a
normal plate.
Pilot lamp
The pilot light signals the connection of the electric
plate.
Important Safety Information
25
Description of the appliance
26
Operation
26
Hints and tips
27
Cleaning and maintenance
27
Instruction for the Installer
28
Possibilities for insertion
29
Electrical connection
30