- DL manuals
- Zanussi Electrolux
- Dishwasher
- ZDF 601
- Instruction Book
Zanussi Electrolux ZDF 601 Instruction Book
Summary of ZDF 601
Page 1
Dishwasher zdf 601 www.Video.Uk.Electrolux.Com instruction book 152950 12/0 uk.
Page 2: Contents
Safety instructions 3 disposal 3 economical and ecological dishwashing 3 description of the appliance 4 the control panel 5 "3 in 1" function 6 prior to using for the first time 7 the water softener 7 filling with dishwasher salt 8 rinse aid 8 in daily use 9 loading cutlery and dishes 9 the lower ba...
Page 3: Disposal
Installation ● check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged, you should contact your supplier. ● for safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. ● any electrical and plumbin...
Page 4: Description of The Appliance
Description of the appliance 4 1. Upper basket stop 2. Water hardness dial 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket 12. Worktop note: this dishwasher has an internal light that ...
Page 5: The Control Panel
Function buttons: in addition to the dishwashing programme selected, the following functions can also be set with the help of these buttons: - the setting of the water softener, - activation/deactivation of the rinse aid dispenser, - the cancelling of a programme in progress, - activation/deactivati...
Page 6
6 "3 in 1" function this appliance is equipped with the "3 in 1" function, that allows the use of the "3 in 1" combi detergent tablets. This function can be selected with all washing programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply containe...
Page 7
7 before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with dishwashe...
Page 8
Filling with dishwasher salt only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. ...
Page 9: In Daily Use
● check if it’s necessary to refill with dishwasher salt or rinse aid ● load cutlery and dishes into the dishwasher. ● fill with dishwasher detergent . ● select a wash programme suitable for the cutlery and dishes. ● start the wash programme. Loading cutlery and dishes sponges, household cloths and ...
Page 10
The cutlery basket long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. Forks and spoons should be placed...
Page 11
Adjusting the height of the upper basket if washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the m...
Page 12: Different Kinds of Detergent
Detergent tablets detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore, please use long washing programmes when using detergent tablets, to ensure the comp...
Page 13: Washing Programmes
13 (2) auto washing programme during the auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. If the appliance is partially loaded and the dishes lightly soiled, the «prewash», «main wash», and «rinse» phases of the programme are shorter and the water con...
Page 14: Starting A Washing Programme
1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2. Turn on the water tap 3. Press the on/off button the on/off indicator light illuminates. 4. Setting and starting the programme select the washing programme and delay start with the door slightly opened...
Page 15: Maintenance and Cleaning
Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door, the detergent and rinse aid dispensers are...
Page 16: Something Not Working
16 certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. Important: if you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation ...
Page 17
If after all these checks, the problem persists, contact your local service force centre, quoting the model (mod.), product number (pnc) and serial number (s.N.). This information can be found on the rating plate located on the side of the dishwasher door (see picture). So that you always have these...
Page 18: Customer Care
In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local service force centre by telephoning: 08705 929929 your telephone call will be automatically routed to the service force centre covering your post code area. For the address of your loca...
Page 19: Guarantee Conditions
Standard guarantee conditions we, zanussi-electrolux, undertake that if within 12 months of the date of purchase this zanussi-electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same free o...
Page 20: Installation Instructions
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Fitting under a counter ...
Page 21
Water supply connections we recommend that this dishwasher is connected to your cold water supply. For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout. The water pressure must be within the limits given in the ...
Page 22
Electrical connection warning: this appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted. Important the wires...
Page 23: Hints For Test Centres
23 testing in accordance with en 60704 must be carried out with appliance fully loaded and using the test programme (see "washing programmes" chart). Test in accordance with en 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respecti...
Page 24
© electrolux plc 2006 03/06 subject to change without notice from the electrolux group. The world’s no.1 choice. The electrolux group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million electrolux group products (such as refrigerators, co...