1. DL manuals
  2. Zanussi Electrolux
  3. Washer
  4. ZWH 6120 P
  5. User Manual

Zanussi Electrolux ZWH 6120 P User Manual

Manual is about: Washing Machine ZWH 6120 P; ZWH 6140 P; ZWH 6160 P

Summary of ZWH 6120 P

  • Page 1

    En user manual washing machine zwh 6120 p zwh 6140 p zwh 6160 p.

  • Page 2: Contents

    Contents safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 environment concerns _ _ _ _ _ _ _ _ _ _ _ _ 4 product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5 technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ...

  • Page 3

    Cur to the product and to property if this is not adhered to. See relevant section in the user manual. • this appliance is free standing only. Do not build it in under a counter and do not remove the worktop for any reason. • after having installed the appliance, check that it is not standing on the...

  • Page 4: Frost Precaution

    • keep all detergents in a safe place out of children’s reach. • make sure that children or pets do not climb inside the drum. To prevent children and pets becoming trapped inside the drum this appli- ance incorporates a special feature. To activate this de- vice, rotate the button (without pressing...

  • Page 5: Product Description

    Household waste disposal service or the shop where you purchased the product. Packaging materials the materials marked with the symbol are recyclable. >pe >ps >pp this means that they can be recycled by dis- posing of them properly in appropriate collec- tion containers. Ecological hints to save wat...

  • Page 6: Technical Data

    Technical data dimensions width height depth 60 cm 85 cm 54 cm electrical connection information on the electrical connection is given on the rating plate, on the inner edge of the appliance door. Water supply pressure minimum maximum 0,05 mpa 0,8 mpa maximum load cotton 7 kg spin speed maximum 1200...

  • Page 7

    • remove the polystyrene base from the bot- tom. • return appliance to it's upright posi- tion. • open the door and remove the plastic hose guide, the bag containing the instruction booklet and the plastic plug caps from the drum. • remove the power supply cable and the draining and inlet hose from ...

  • Page 8

    Positioning and levelling x 4 level the appliance by raising or lowering the feet. The appliance must be level and stable on a flat hard floor. If necessary, check the setting with a spirit level. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and d...

  • Page 9

    Tie the plastic hose guide to the tap with a string to prevent that the drain hose unhooks when the appliance is emptying. • onto a sink outlet spigot. Push the drain hose onto the spigot and se- cure with a clip, ensure a loop is formed in the drain hose to prevent waste from the sink entering the ...

  • Page 10

    Connections overview ~max.400 cm min. 60 cm max. 100 cm 0.5 bar (0.05 mpa) 8 bar (0.8 mpa) min. 60 cm max. 100 cm in the interest of the environment the appliance should be connected to the foul drainage system, the water will then be taken to a sewage works for treatment before being discharged saf...

  • Page 11: First Use

    Warning! The appliance is supplied with a 13 amp plug attached. Use a 13 amp asta approved (bs 1362) fuse if it is necessary to change the fuse in the plug supplied. A cut off plug inserted into a 13 amp socket is a serious safety danger. Make sure that it is disposed of safely. First use • ensure t...

  • Page 12

    Ink: depending on the type of ink, moisten the fabric first with acetone 1) , then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, me- thylated spirits or benzine, then rub with deter- gent paste. Open the...

  • Page 13

    Open the detergent dispenser drawer compartment for powder or liquid de- tergent used for main wash. Compart- ment for liquid addi- tives (fabric softener, starch). Warning! If you wish to carry out the prewash, pour the detergent among washing items into the drum. Warning! Depending on the type det...

  • Page 14

    Warning! Do not use the flap in "down" position with: • gelatinous detergent or thick detergent. • powder detergent. • with programmes with prewash. • do not use liquid detergent if the washing programme doesn't start immediately. In all above listed cases, use the flap in "up" position . Measure ou...

  • Page 15

    7 6 4 3 2 1 5 1 programme selector di- al specials cottons cottons +prewash economy synthetics mixed fabric delicates wool handwash rinse drain spin easy iron blanket mini 30 jeans turn the programme selector dial to the required pro- gramme. The selector dial can be turned either clock- wise or cou...

  • Page 16

    3 automatic spin reduc- tion and rinse hold spin by selecting a programme, the appliance proposes automati- cally the maximum spin speed provided for that programme. By selecting automatic spin reduction ( ) the spin speed is reduced to a half, but not less than 400 rpm. The relevant light illuminat...

  • Page 17

    Cancelling the delayed start after having started the programme: • set the appliance to pause by pressing the button 6; • press the button 5 once, the light relevant to the selected delay goes off; • press the button 6 again to start the programme. The delay start cannot be selected with the drain p...

  • Page 18

    , . 7.1 7.2 7.3 indicator pilot lights • when you start the programme by pressing the button 6, the washing phase pilot light (7.1) illuminates. This means that the appliance is operating. • the additional rinses pilot light (7.2) illuminates when the appliance performs an extra rinse. • when the pr...

  • Page 19: Washing Programmes

    Washing programmes programme - maximum and minimum temperature - cycle description - maximum spin speed - maximum fabrics load - type of laundry options detergent compartment cottons 90°-cold main wash - rinses - maximum spin speed at: 1200 rpm for model zwh 6120p; 1400 rpm for model zwh 6140p; 1600...

  • Page 20

    Programme - maximum and minimum temperature - cycle description - maximum spin speed - maximum fabrics load - type of laundry options detergent compartment wool / handwash 40°- cold main wash - rinses - maximum spin speed at 1200 rpm max. Load 1 kg machine washable wool, hand washable woollens and d...

  • Page 21: Consumption Values

    Programme - maximum and minimum temperature - cycle description - maximum spin speed - maximum fabrics load - type of laundry options detergent compartment mini 30 30° main wash - rinses - maximum spin speed at 700 rpm max. Load 3 kg synthetics and delicates. Lightly soiled items or which only needs...

  • Page 22: Care And Cleaning

    Programmes loa d (k g) e n ergy cons u mpt ion (kwh) wa te r co n s um pt ion (litre) ap p rox im at e pro g ra mme dura tion (m inute s ) r e ma in ing mois tu re (%) 1) zwh 6120p r e ma in ing mois tu re (%) 1) zwh 6140p r e ma in ing mois tu re (%) 1) zwh 6160p delicates 40 °c 3,5 0.65 71 77 35 3...

  • Page 23

    • use a stiff brush to clean and remove all washing powder residue. • clean all the removed parts of the dispens- er drawer under a tap to remove any traces of accumulated powder. • use the previous brush to clean the recess, ensuring that upper and lower part of it is well cleaned. After having cle...

  • Page 24: What to Do If…

    The filter is inserted correctly when the indicator on its top is visible and blocked. • close the filter cov- er; • insert the mains plug again. Cleaning the water inlet filters important! If the appliance doesn't fill, it takes a long time to fill with water, the starting button flashes red or the...

  • Page 25

    The water tap is closed. • open the water tap. The inlet hose is squashed or kinked. • check the inlet hose connection. The filter in the inlet hose or the inlet valve filter are blocked • clean the water inlet filters (read "cleaning the water inlet filters" for more details). The light of button 6...

  • Page 26

    The door has not been closed or is not closed properly. • close firmly the door. The appliance does not start or stops during operation without any visible alarm. Before contacting your local service centre, please carry out the checks listed below. Malfunction possible cause / solution the applianc...

  • Page 27

    Malfunction possible cause / solution the appliance vibrates noisily: the transit bolts and packing have not been removed. • check the correct installation of the appliance. The appliance is not levelled correctly. • adjust the feet. The laundry is not evenly distributed in the drum. • redistribute ...

  • Page 28

    Mod. ... ... ... Pr od. No. ... ... ... Ser . No. ... ... ... Mod . .. . ... .. . Pr od. N o . . .. ... . . S er . N o . ... .. . ... Model description (mod.) ........................................ Product number (pnc) ............................................. Serial number (s.N.) ...............

  • Page 29

    29 www.Zanussi.Com.

  • Page 30

    30 www.Zanussi.Com.

  • Page 31

    31 www.Zanussi.Com.

  • Page 32

    Www.Zanussi.Com/shop 192 987301-a-172 012.