- DL manuals
- Zanussi
- Washer
- FJE 1005
- Instruction Booklet
Zanussi FJE 1005 Instruction Booklet
Summary of FJE 1005
Page 1
Washing machine automatickÁ praČka automatickÁ prÁČka automata mosÓgÉp fje 1005 60˚c 40˚c 95˚c 30˚c 1000 900 700 500 fje 1005 instruction booklet nÁvod k obsluze nÁvod na obsluhu hasznÁlati ÚtmutatÓ 132999480 sk h cz gb 132999480•gb 4-10-2000 14:32 pagina 1.
Page 2
2 dear customer, please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages when unpacking the applia...
Page 3: Contents
English contents 3 maintenance 20 door seal 20 bodywork 20 detergent dispenser drawer 20 drain filter 20 water inlet filter 21 emergency emptying out 21 frost precautions 21 something not working? 22-23 warnings 4-5 disposal 5 tips for environmental protection 5 technical specifications 6 installati...
Page 4: Warnings
4 installation • all internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. • any electric...
Page 5: Disposal
English 5 disposal tips for environmental protection packaging materials the materials marked with the symbol are recyclable. >pe=polyethylene >ps=polystyrene >pp=polypropylene this means that they can be recycled by disposing of them properly in appropriate collection containers. Machine use author...
Page 6: Technical Specifications
6 dimensions height 85 cm width 60 cm depth 60 cm maximum load cotton 5.5 kg synthetics 2.5 kg delicates 2.5 kg woollens 2 kg spin speed 1000 rpm max. Power supply voltage/frequency 220-230 v/50 hz total power absorbed 2200 w minimum fuse protection 10 a water pressure minimum 50 0 kpa maximum 800 k...
Page 7: Installation
English installation 7 unpacking all transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt and lay...
Page 8
8 water drainage the end of the drain hose can be positioned in three ways: hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece...
Page 9: Your New Washing Machine
English 9 your new washing machine this new washing machine, which is fitted with the jet system, patented zanussi, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Further savings are achieved by washing small loads of laundry, since water ...
Page 10: Use
10 use 60˚c 40˚c 95˚c 30˚c 1000 900 700 500 fje 1005 control panel 4 temperature button press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light u...
Page 11
English • draining and spin: - press the start/pause button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme. - select spin speed by means of button 5, and press the start/pause button. • drain only - press the skip/reset button (9) on...
Page 12
This button allows you also to select special programmes, such as rinses , spin and drain . • if the machine is already switched on because it has just performed a washing programme, proceed as follows: - depress reset once or repeatidly to cancel the previously performed programme (all the lights m...
Page 13: Washing Hints
English 13 washing hints sorting the laundry follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures 95° for normally soiled white cottons and linen (e.G. Tea cloths,...
Page 14
Quantity of detergent to be used the type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used. Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from ...
Page 15
English international wash code symbols these symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash delicate wash max. Wash temperature 95 ° c max. Wash temperature 60 ° c max. Wash temperature 40 ° c max. Wash temperature 30 ° c hand wash do...
Page 16: Operating Sequence
16 4. Switch the machine on press the on/off button to switch the machine on. The light above the button will light up. 5. Select the desired programme/ fabric press the fabric button repeatedly, in order to select the desired programme/fabric. The relevant light will light up. The lights relevant t...
Page 17
English 17 10. Start the programme press the start/pause button . The relevant light will stop flashing, the door locked light will light up, and only the light relevant to the phase that is in progress will remain lit. 11. How to change a programme during its cycle before you make any change, you m...
Page 18
18 12. How to cancel a programme during its cycle to cancel a programme that is being carried out, first pause the washing machine by pressing the start/pause button, then press the skip/reset button repeatedly, until all the lights go out. 13. How to open the door during the cycle of a programme yo...
Page 19: Washing Programmes
English 19 washing programmes * the consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme. F...
Page 20: Maintenance
20 maintenance 1. Door seal check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. 2. Bodywork clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth....
Page 21
English 21 5. Water inlet filter if you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap. Clean the filter with a stiff brush. Screw the hose back onto the tap. 6. Emergency emptying ...
Page 22: Something Not Working?
22 something not working? Problem possible cause • the machine does not start up: • the door is not firmly closed. • the machine is not plugged in or there is no power at the socket. • the main fuse has blown. • the start/pause button has not been depressed. • the machine does not fill: • the water ...
Page 23: Problem
English 23 if you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the service centre will require this information. Mod. .......... Prod. No. ........... Ser. No. ......... Mod. .....