- DL manuals
- Zanussi
- Washer
- FJS 1084 C
- Instruction Booklet
Zanussi FJS 1084 C Instruction Booklet
Summary of FJS 1084 C
Page 1
W ashing machine fjs 1084 c 1 2 0 0 b b b c d f h h j k a l m n p g 60º- 95º 40º- 60º 40º- 60º 40º- 60º 30º- 40º 30º- 40º 30º- 40º instruction booklet 124974650
Page 2
2 dear customer, please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages when unpacking the applia...
Page 3: Content
3 warnings 4-5 discarding 5 tips for environmental protection 5 technical specifications 6 installation 7 transit devices 7 positioning 7 water inlet 8 water drainage 8 electrical connection 8 your new washing machine 9 description of the appliance 9 detergent dispenser drawer 9 use 10 control panel...
Page 4: Warnings
4 general safety • in the event of a fault, do not attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause damage. • if repairs are needed, contact an authorised service centre and ask for genuine spare parts. • this appliance is designed to be used by adults...
Page 5: Discarding
5 discarding tips for environmental protection child safety • children are often not aware of the dangers of electrical appliances. When the machine is working, children should be carefully supervised and not allowed to play with the appliance. • the packaging components (e.G. Plastic film, polystyr...
Page 6: Technical Specifications
6 technical specifications dimensions height 85 cm width 60 cm depth 58 cm maximum load cotton 5 kg synthetics, delicate fabrics 2 kg woollens 1 kg spin speed 1000 rpm max. For cotton & linen 0 900 rpm max. For programme “n” power supply voltage/frequency 220-230v/50 hz total power absorbed 2200 w m...
Page 7: Installation
7 transit devices all transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt. 2. Lay the machine on...
Page 8
Water inlet connect the water inlet hose to a tap with a 3/4" thread after having inserted the small filter “a” supplied with the machine. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fittin...
Page 9: Your New Washing Machine
Your new washing machine 9 your new washing machine, fitted with the zanussi “jet system”, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated autom...
Page 10: Use
10 use control panel 1 programme chart the programme chart on the front side of the detergent dispenser drawer provides a general view of programmes available. 2 on/off button by pressing this button the machine is switched on and off. 3 spin reduction button by pressing this button the final spin s...
Page 11: Washing Hints
11 washing hints sorting the laundry • follow the wash code symbols on each garment label and the manufacturer’s washing instructions. • sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. • never wash whites and coloureds together. Whites may lose their “whiteness” in t...
Page 12
12 ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do no...
Page 13: Operating Sequence
13 operating sequence before washing your first load of laundry, we recommend that you run a cotton cycle at 60°c, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. 1. ...
Page 14
14 5. Select the temperature turn the temperature selector dial to the required temperature. 6. Select the required programme turn the programme selector dial clockwise to the required programme. 7. Start the machine before starting up the machine check that: • the appliance is plugged in, • the wat...
Page 15
15 international wash code symbols these symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. I energetic wash delicate wash max. Wash temperature 95°c max. Wash temperature 60°c max. Wash temperature 40°c max. Wash temperature 30°c hand wash do not wash a...
Page 16: Programme Table
16 programme table normal programmes for cotton and linen * these consumption rates are indicative and depend on the quantity and type of laundry, on the water and environment temperature. They refer to the warmest temperature of water allowed for each programme. Programme b fabric additional functi...
Page 17: Programme Table
17 programme table * these consumption rates are indicative and depend on the quantity and type of laundry, on the water and environment temperature. They refer to the warmest temperature of water allowed for each programme. The water of the last rinse of these programmes is not emptied out to preve...
Page 18: Maintenance
18 1. Bodywork clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. 2. Detergent dispenser drawer after a while...
Page 19
19 4. Water inlet filter if you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap and remove the filter. Clean it with a stiff brush. Refit the filter and screw the hose back onto the ...
Page 20: Something Not Working?
20 something not working? Problems which you can resolve yourself. Problem possible cause • the machine does not start up: • the machine does not fill: • check that the water tap is open. • check that water is coming out of the tap. • check that the inlet hose is not squashed or kinked. • check that...
Page 21: Problem
21 • the door will not open: if you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the service centre will require this information. • the programme is still running. • the door l...
Page 22
Made in italy.