- DL manuals
- Zanussi
- Washer
- FL 1201
- Instruction Booklet
Zanussi FL 1201 Instruction Booklet
Summary of FL 1201
Page 1
Washing machine pralka automatyczna automatickÁ praČka automatickÁ prÁČka automata mosÓgÉp fl1001-fl 1201 instruction booklet instrukcja obslugi nÁvod k obsluze nÁvod na obsluhu hasznÁlati ÚtmutatÓ 132999510 sk h cz pl gb 132999510•gb 11-10-2000 17:41 pagina 1.
Page 2
2 dear customer, please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. Transport damages when unpacking the applia...
Page 3: Contents
English 3 contents maintenance 24 door seal 24 bodywork 24 detergent dispenser drawer 24 drain filter 24 water inlet filter 25 emergency emptying out 25 frost precautions 25 something not working? 26-27 warnings 4-5 disposal 5 tips for environmental protection 5 technical specifications 6 installati...
Page 4: Warnings
4 installation • all internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. • any electric...
Page 5: Disposal
English 5 disposal tips for environmental protection packaging materials the materials marked with the symbol are recyclable. >pe=polyethylene >ps=polystyrene >pp=polypropylene this means that they can be recycled by disposing of them properly in appropriate collection containers. Machine use author...
Page 6: Technical Specifications
6 dimensions height 85 cm width 60 cm depth 60 cm maximum load cotton 5.5 kg synthetics 2.5 kg delicates 2.5 kg woollens 2 kg spin speed 1000 rpm max. (fl 1001) 1200 rpm max. (fl 1201) power supply voltage/frequency 220-230 v/50 hz total power absorbed 2200 w minimum fuse protection 10 a water press...
Page 7: Installation
English unpacking all transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on...
Page 8
Water drainage the end of the drain hose can be positioned in three ways: hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece o...
Page 9: Your New Washing Machine
English 9 your new washing machine this new washing machine, which is fitted with the jet system, patented zanussi, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. Further savings are achieved by washing small loads of laundry, since water ...
Page 10: Use
1 function of memory buttons there are 4 memory buttons at your disposal to memorize and recall the four washing programmes that are used more frequently. • choose the washing programme as described on page 19. • start the programme pressing the start/pause button. • press only one of the memory but...
Page 11
Pressing the on/off button the machine is switched on and off; the machine can be programmed when three dashes are blinking on the display. If you want to cancel a programme already started, you must switch the machine off. The chosen programme is cancelled in this way. 3 fabrics button after having...
Page 12
There are 3 possibilities to drain the water: • choose the “drain” programme. The water is drained without spin. • press only the start/pause button. The machine drains the water and carries out the spin cycle provided for the type of fabric. • select the spin speed select the desired spin speed wit...
Page 13
This programme can be used particularly for briefly used and not very soiled laundry and for laundry stained with sweat. It is possible to set a washing temperature of 60°c max. Not suitable for wool and for items bearing the “hand wash” label. The soak programme is a separate programme; it is start...
Page 14
After the start, the indication of the remaining time decreases by one unit every minute. Many elements determine the duration of the programme, e.G. The wash load, the temperature of the incoming water, the formation of lather, etc. These elements are recorded by the electronic system and the indic...
Page 15
Pressing this button: • the water of the programme “soak” is drained, • the water in the programmes with "rinse hold” option is drained and a final spin is carried out. 10 delay start button with this button it is possible to delay the starting of the programme by up to 24 hours max. • switch the ma...
Page 16: Washing Hints
Washing hints sorting the laundry follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures 95° for normally soiled white cottons and linen (e.G. Tea cloths, towels, ta...
Page 17
Ink: depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do not u...
Page 18
International wash code symbols these symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash delicate wash max. Wash temperature 95 ° c max. Wash temperature 60 ° c max. Wash temperature 40 ° c max. Wash temperature 30 ° c hand wash do not was...
Page 19: Operating Sequence
Operating sequence before washing your first load of laundry, we recommend that you run a cotton cycle at 60°c, with the machine empty, to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent in the compartment of the detergent drawer and start the machine. Choosi...
Page 20
6. Choose the temperature press the button until the desired washing temperature illuminates. 7. Choose any options choose the desired options (prewash, quick wash, economy. The corresponding light will light up. 8. Select, if necessary, the extra rinse option. 9. Set the delayed start if you want t...
Page 21
Altering a programme • as long as a washing programme is not started, the different options can be modified without any problems. • if you want to modify a programme in progress, you must press the pause button, afterwards it is possible to carry out a modification of the washing programme. Interrup...
Page 22: Programme Chart
22 programme chart washing programmes programmes fabrics available options max. Load white cotton 95° white cotton economy 95° coloured cotton ** cold -30°-40°-60° coloured cotton economy 60° synthetic cold -30° -40° -60°c synthetic economy 60° delicate cold -30°-40°c wool cold -30°-40°c handwash co...
Page 23: Programme Chart
23 english programme chart special programmes programmes programme description running of programmes available options max. Load freshen up cold -30°-40°- 60° soak rinses spin drain cancel for slightly soiled fabrics, not for wool for heavily soiled fabrics, not for wool with this programme the hand...
Page 24: Maintenance
1. Door seal check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. 2. Bodywork clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do ...
Page 25
5. Water inlet filter if you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap. Clean the filter with a stiff brush. Screw the hose back onto the tap. 6. Emergency emptying out if the ...
Page 26: Something Not Working?
26 something not working? Problem possible cause • the machine does not start up: • the door is not firmly closed. (e40) • the machine is not plugged in or there is no power at the socket. • the main fuse has blown. • the start/pause button has not been depressed. • the delay start option has been s...
Page 27: Problem
English 27 if you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the service centre will require this information. P0042 problem possible cause • spinning starts late or the laund...