1. DL manuals
  2. Zanussi
  3. Washer
  4. FLS 579 C
  5. Instruction Booklet

Zanussi FLS 579 C Instruction Booklet

Summary of FLS 579 C

  • Page 1

    Washing machine fls 579 c 5 1 2 2 3 4 6 7 8 9 10 11 12 13 f l s - 5 7 9 c 30 ° 40° 50° 60 ° 70° 80 ° 90 ° 1 2 3 4 6 8 9 10 11 13 5 7 12 instruction booklet 35.292.487/0

  • Page 2: Installation

    2 installation ■ this appliance is heavy. Care should be taken when moving it. ■ it is dangerous to alter the specifications or attempt to modify this product in any way. ■ all packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is no...

  • Page 3: Table of Contents

    3 table of contents for the user important safety information 2 description of the appliance 4 the control panel 5 operating sequence 6-7 before the first use 6 load the laundry 6 measure out the detergent 6 measure out the additive 6 select the temperature 6 select the required programme 7 start th...

  • Page 4: Description of The Appliance

    4 description of the appliance 1 detergent dispenser drawer 2 programme guide 3 “mains-on” light 4 “options” buttons 5 temperature selector dial 6 program selector dial & on/off switch 7 door opening handle 8 filter 9 adjustable feet detergent dispenser drawer prewash wash fabric softener 5 1 2 2 3 ...

  • Page 5: The Control Panel

    5 the control panel 1 programme guide 2 on/off lamp it lights when the appliance is operating. 3 half load button available only for programmes 1 to 4 pressing this button before starting the intense program there will be one rinse less which leads to energy and water saving 4 rinse hold button avai...

  • Page 6: Operating Sequence

    6 6 operating sequence before your first wash, we recommend that you run a cotton cycle at 60°c, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. 1. Load the laundry open th...

  • Page 7: 6. Start The Machine

    7 7 5. Select the required programme turn the programme selector dial clockwise to the required programme. 6. Start the machine before starting up the machine check that: ■ the appliance is plugged in ■ the water supply tap is turned on ■ the door and the detergent dispenser drawer are closed. Pull ...

  • Page 8: Washing Programmes

    8 washing programmes programmes for cotton and linen maximum load 5 kg program. Dial position program temperature ˚c degree of soil compartments to use description possible options 1 whites with prewash 60°- 90° heavy soiled prewash at 40 ˚c wash at 60˚- 90˚c 4 rinses spin at 500 rpm 2 (•) whites wi...

  • Page 9: Washing Programmes

    9 program. Dial position program temperature ˚c degree of soil compartments to use description possible options 7 mixed fabrics 40°- 60° heavy soiled prewash at 40 ˚c wash at 40˚- 60˚c 3 rinses draining of water 8 non fast coloureds 40°- 60° normal soiled wash at 40˚- 60˚c 3 rinses draining of water...

  • Page 10: Washing Hints

    10 washing hints i do not overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg sheet 700-1000 g pillow case 100-200 g tablecloth 400-500 g serviette 50-100 g tea towel 70-120 g linen ...

  • Page 11: Wash Care Symbols

    11 wash care symbols wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of europe. The symbols used make it easy to select the correct programme on your washing machine. Washing symbol ...

  • Page 12: Maintenance and Cleaning

    12 maintenance and cleaning before any maintenance or cleaning is carried out you must disconnect tha appliance from the electricity supply descaling the water we normally use contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any la...

  • Page 13: Cleaning The Filter

    13 cleaning the filter the water drain filter a clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is blocked and the machine i...

  • Page 14: Something Not Working

    14 mod. .......... Prod. No. ........... Ser. No. ......... Mod. .......... Ser. P0042 something not working certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local service force centre, please car...

  • Page 15: Installation Instructions

    15 15 installation instructions it is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a q...

  • Page 16: Unpacking

    16 16 unpacking before starting the machine up, the transport security bolts must be removed as follows: you are advised to keep all the packaging for re-use in case the appliance has to be transported again. ■ unscrew and remove the three rear transit bolts (using a spanner). ■ lay the machine gent...

  • Page 17: Positioning

    17 positioning your new zanussi washing machine has been designed to be permanently plumbed in to you home’s water supply and drainage system. However, if this is not possible, it may be connected to suitable existing taps, with the drain hose discharging into the sink. Water inlet there should be a...

  • Page 18: Levelling

    18 if the machine is permanently plumbed in, hook the end of the hose into a standpipe installed for the purpose. The standpipe must have an internal diameter of at least 40mm in order that there is an air gap between the drain hose and the standpipe. Make sure, that it is designed in such a way, th...

  • Page 19: Electrical Connections

    19 19 electrical connections any electrical work required to install this appliance should be carried out by a qualified electrician.Or competent person warning: this appliance must be earthed. The manufacturer declines any liability should this safety measure not be observed. Before switching on, m...

  • Page 20

    Epesl/z - 3 4 5 6 7 8 9 10 11 12/98.