Zanussi FLS 879 C Instruction Booklet - Your New Washing Machine

Summary of FLS 879 C

  • Page 1

    Washing machine fls 879 c 5 1 2 2 3 4 6 7 8 9 10 11 12 13 f l s - 8 7 9 c 1 2 3 4 6 7 9 11 13 8 12 5 10 30 ° 40° 50° 60 ° 70° 80 ° 90 ° instruction booklet 35.292.488/0

  • Page 2: Your New Washing Machine

    2 your new washing machine i your new washing machine, meets all modern needs for effective treatment of laundry with low water, energy and detergent consumption. ■ the special wool programme with its new delicate wash system treats your woollen with extreme gentleness. ■ the anti-unbalance device e...

  • Page 3: Installation

    Installation ■ this appliance is heavy. Care should be taken when moving it. ■ it is dangerous to alter the specifications or attempt to modify this product in any way. ■ all packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not ...

  • Page 4: Contents

    4 contents for the user your new washing machine 2 important safety information 3 description of the appliance 5 the control panel 6 operating sequence 7-8 before the first use 7 load the laundry 7 measure out the detergent 7 measure out the additive 7 select the temperature 7 select the required pr...

  • Page 5: Description of The Appliance

    5 description of the appliance 1 detergent dispenser drawer 2 programme guide 3 “mains-on” light 4 “options” buttons 5 temperature selector dial 6 program selector dial & on/off switch 7 door opening handle 8 filter 9 adjustable feet detergent dispenser drawer prewash wash fabric softener 1 2 3 4 5 ...

  • Page 6: The Control Panel

    6 the control panel 1 programme guide 2 on/off lamp it lights when the appliance is operating. 3 rinse hold button available only for programmes 7 to 12 press this button to make the machine stop with water in the drum after the synthetic or delicate wash cycles. This prevents any creasing which may...

  • Page 7: Operating Sequence

    7 operating sequence before your first wash, we recommend that you run a cotton cycle at 60°c, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. 1. Load the laundry open the ...

  • Page 8: 6. Start The Machine

    8 5. Select the required programme turn the programme selector dial clockwise to the required programme. 6. Start the machine before starting up the machine check that: ■ the appliance is plugged in ■ the water supply tap is turned on ■ the door and the detergent dispenser drawer are closed. Pull th...

  • Page 9: Washing Programmes

    9 washing programmes programmes for cotton and linen maximum load 5 kg program. Dial position program temperature ˚c degree of soil compartments to use description possible options 1 whites with prewash 60°- 90° heavy soiled prewash at 40 ˚c wash at 60˚- 90˚c 4 rinses spin at 850 rpm 2 (•) whites wi...

  • Page 10: Washing Programmes

    10 program. Dial position program temperature ˚c degree of soil compartments to use description possible options 7 mixed fabrics 40°- 60° heavy soiled prewash at 40 ˚c wash at 40˚- 60˚c 3 rinses draining of water 8 non fast coloureds 40°- 60° normal soiled wash at 40˚- 60˚c 3 rinses draining of wate...

  • Page 11: Washing Hints

    11 washing hints i do not overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg sheet 700-1000 g pillow case 100-200 g tablecloth 400-500 g serviette 50-100 g tea towel 70-120 g linen ...

  • Page 12: Wash Care Symbols

    12 wash care symbols wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of europe. The symbols used make it easy to select the correct programme on your washing machine. Washing symbol ...

  • Page 13: Maintenance and Cleaning

    13 maintenance and cleaning before any maintenance or cleaning is carried out you must disconnect tha appliance from the electricity supply descaling the water we normally use contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any la...

  • Page 14: Cleaning The Filter

    14 cleaning the filter the water drain filter a clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme. Open the filter door and place a container underneath to catch any spillage. If the filter is blocked and the machine i...

  • Page 15: Something Not Working

    15 something not working certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local service force centre, please carry out the checks listed below. Symptom the machine does not start possible causes ■...

  • Page 16

    16 if after all these checks, the problem persists, contact your local service force centre, quoting the model and serial number. This information can be found on the rating plate (see picture). Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. In...

  • Page 17: Installation Instructions

    17 installation instructions it is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qual...

  • Page 18: Unpacking

    18 unpacking before starting the machine up, the transport security bolts must be removed as follows: you are advised to keep all the packaging for re-use in case the appliance has to be transported again. ■ unscrew and remove the three rear transit bolts (using a spanner). ■ lay the machine gently ...

  • Page 19: Positioning

    19 19 positioning your new zanussi washing machine has been designed to be permanently plumbed in to you home’s water supply and drainage system. However, if this is not possible, it may be connected to suitable existing taps, with the drain hose discharging into the sink. Water inlet there should b...

  • Page 20: Water Drainage

    20 water drainage if you intend the drain hose from the machine to empty into a sink, make sure that the sink is empty and that the plug hole is not blocked. Place the drain hose in the sink with the aid of the bent piece delivered separately. The bent piece has to be entered into the tube´s mouth i...

  • Page 21: Levelling

    21 levelling level the washing machine by loosening or tightening the feet. Once in the right position fix the feet by pushing the nuts against the base of the case accurate levelling prevents vibration, noise and displacement of the machine during operation. After levelling the machine, secure the ...

  • Page 22: Electrical Connections

    22 electrical connections any electrical work required to install this appliance should be carried out by a qualified electrician.Or competent person warning: this appliance must be earthed. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make...

  • Page 23

    Epesl.