1. DL manuals
  2. Zanussi
  3. Hob
  4. Hobs
  5. Instruction Booklet

Zanussi Hobs Instruction Booklet

Manual is about: Gas hobs

Summary of Hobs

  • Page 1

    Gas hobs instruction booklet please read this instruction booklet before using the appliance gb.

  • Page 2

    2 this appliance complies with the following e.E.C. Directives: * 73/23 - 90/683 (low voltagedirective); * 93/68 (general directives); * 89/336 (electromagnetical compatibility directive); * 90/396 (gas appliances), and subsequent modifications guide to use the instructions the following symbols wil...

  • Page 3

    3 contents for the user for the installer important safety information 2 description of the hob 3 operation 4 maintenance and cleaning 4 something not working? 5 service and spare parts 5 customer care department 6 guarantee conditions 6 engineers technical data 9 installation 10 important safety re...

  • Page 4

    4 operation hob burners to light a burner: l turn the relevant control knob anticlockwise to maximum position; l at the same time push the electric ignition pushbutton which is marked by a little spark; l then adjust the flame as required. If the burner does not ignite, turn the control knob to zero...

  • Page 5

    5 something not working? If the hob is not working correctly, please carry out the following checks before contacting your local service force centre. Important: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made e...

  • Page 6

    6 zanussi guarantee conditions we, zanussi, undertake that if, within 24 months of the date of the purchase, this zanussi appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option, repair or replace the same free of any char...

  • Page 7

    7 zanussi service force to contact your local zanussi service force centre telephone 08705 929 929 channel islands guernsey guernsey electricity po box 4 vale, guernsey channel islands jersey jersey electricity company po box 45 queens road st helier jersey channel islands je4 8ny scotland aberdeen ...

  • Page 8

    8 zanussi service force to contact your local zanussi service force centre telephone 08705 929 929 midlands birmingham 66 birch road east (m18) wyrley road ind. Estate witton birmingham b6 6db bourne manning road ind. Estate (m44) pinfold road bourne pe10 9ht bridgnorth 68 st. Mary’s street (m72) br...

  • Page 9

    9 burner rapid semi-rapid auxiliary (large) (medium) (small) position max min max min max min nominal thermal power kw 3.0 0.65 2.0 0.45 1.0 0.33 nominal flow rate m 3 /h 0.286 0.057 0.190 0.038 0.095 0.028 nozzle reference 119 adjust. 9 6 adjust. 7 0 adjust. Nominal thermal power kw 2.8 0.65 2.0 0....

  • Page 10

    10 700 mm 400 mm 100 mm 400 mm 50 mm 55 mm 50 mm 650 mm 400 mm 400 mm 100 mm 50 mm 50 mm 55 mm 600 mm fo 0812 fo 0813 important safety requirements this hob must be installed in accordance with the gas safety (installation and use) regulations (current edition) and the iee wiring regulations (curren...

  • Page 11

    11 on/off switch flex outlet on/off switch flex outlet fo 0763 fo 0764 1 2 dimensions are given in mm. Building in building over a cupboard or drawer if the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside...

  • Page 12

    12 permanent connection in the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. Between the switch contacts and of a type suitable for the required load in compliance with the current...

  • Page 13

    13 a. Ignitor switch b. Ignitor unit b l n 0 1 2 3 4 5 6 220/240 a wiring diagram fault finding preliminary electrical systems check a. Earth continuity check - appliance must be electrically disconnected - meter set on w (ohms) x 1 scale and adjust zero if necessary. A) test leads from any applianc...

  • Page 14

    14 ignition system / gas ignition yes check plug top fuse and replace if necessary check polarity and earth continuity of supply point check earth continuity of appliance ignitor does not spark check fitting of burners check position of the electrode check by pass simmer adjusted light burner manual...

  • Page 15

    15 commissioning when the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below. - turn the gas tap to the max position and ignite. - set the gas tap to the min flame position then turn the control knob from min to max several ti...

  • Page 16

    Customer care zanussi 55-77 high street slough berkshire, sl1 1dz tel: 08705-727727 © electrolux household appliances limited 2000 grafiche mdm - forlì 35663-9904 10/00 from the electrolux group. The world’s no.1 choice. The electrolux group is the world’s largest producer of powered appliances for ...